Hello to all mustang people out there ,i am new to this but have questions that might be dumb to some but can help me out. I really want to know if i can put the suspension from a 2015 on a 2000 mustang but are v6 engines but i want to swap the 3.7 into the 2000 because its blown .any advice is welcome.
New Comer
- Thread starter Joe Mitchell
- Start date
-
Sponsors (?)
Welcome to stangnet
I'll move this to the sn95 forums so you can get advice from people that have that model stang, they may be able to offer some help.
I'll move this to the sn95 forums so you can get advice from people that have that model stang, they may be able to offer some help.
The answer to your first question is no. Two different suspensions on the 2000 and 2015. Not sure what you are asking in the second
wmburns
SN Certified Technician
Just wondering. You are aware that a Modular OHC V6 from a 2015 will NOT bolt up the transmission of a 2000 V6 right? Count the number of bolt holes around the starter. They are different.
What is it you are trying to do?
What is it you are trying to do?
Last edited:
When you say suspension, do you mean the IRS? Or the k-member front control arm area?
I remember reading about someone swapping the new IRS into a fox body. I'll have to see if I can find it. It was more complicated than the '03-'04 cobra IRS swap, that's fairly straightforward.
I remember reading about someone swapping the new IRS into a fox body. I'll have to see if I can find it. It was more complicated than the '03-'04 cobra IRS swap, that's fairly straightforward.
