Quiet down that Triax...look here!

[menasci]

Here is how I silenced my Triax:

Tools needed:
1. Electrical Tape
2. Teflon Tape
3. 1ft of Dynamat (or alternative)

Procedure:
1. remove shift knob and shift handle.
2. remove that rubber insulator POS. (dont need it)
3. wrap electrical tape around the shifter shaft.
4. wrap electrical tape around the shifter handle.
5. Poke holes thru the tape where the handle & shaft bolts together.
6. Attatch handle to shaft.
7. wrap electrical tape around the connected area.
8. wrap teflon tape around handle threads before attatching shifter knob.
9. lay down fatmat stuff all around base of shifter.
10. That's it! No more rubber insulator POS and purre silence

 

[ZIPP0]

Post some pics of your car!

 

[menasci]

Post some pics of your car!

oh boy....you again.
Dude, send me a digital camera.

 

[Darkwing]

Here is how I silenced my Triax:

Tools needed:
1. Electrical Tape

But dude, we both live in Arizona... Don't you think that the sticky stuff on the electrical tape is going to lose some of it's stick and get mushy in the summer? Especially if it's conducting heat from the Tranny...

 

[94GTStang]

My Steeda is pretty quiet. Don't know what everyone complains about?

 

[Rev Maynard]

My Steeda is pretty quiet. Don't know what everyone complains about?

 

[COramprat]

Mine is a little noisier than stock but I can live with it. I may try this to see if I have just gotten used to the noise. Thanks for the tip.

 

[DeadLurker]

My Steeda is pretty quiet. Don't know what everyone complains about?

 

[menasci]

But dude, we both live in Arizona... Don't you think that the sticky stuff on the electrical tape is going to lose some of it's stick and get mushy in the summer? Especially if it's conducting heat from the Tranny...

Hmmmm.....
well, when summer rolls around I'll take a look.
For now it's cool

 

[mhanna77]

My Steeda makes alot of noise IMO.

 

[Ruffrider]

If you can hear your shifter you need a louder exhaust and radio .

My Tri-Ax in my '88 made no more noise than the stock pos shifter.