Really need help picking U/L Control arms!

cdavego03

Founding Member
Sep 7, 2001
623
0
0
35
Metro Detroit
Visit site
I have ssm lowers with upr dbl adjustable uppers. It is too hardcore for me. I want a perfect mix of launching traction with some ability to handle. It is for a street car with c springs, adn 17' wheels and tires. I just want something better than stock. I do not want to spend a lot of money. I would prefer non adjustable control arms to keep it simple. I want it to ride nice but get traction.


thank you
:SNSign:
 
  • Sponsors(?)


Grn92LX

Fidanza Man!
Founding Member
Jan 14, 2001
6,755
44
129
New York
Visit site
Keep the uppers you have! Why you'd change them is beyond me. I agree that a std MM or similar equivelent lower is what you want. Do NOT change those uppers, they're perfect for you.
 

cdavego03

Founding Member
Sep 7, 2001
623
0
0
35
Metro Detroit
Visit site
I do understand why you say to keep the uppers, I hope to, but I am affraid that with they will be too rough of a ride, and I am not sure how to properly adjust them. pinion angle and all. I have heard nothing but great things from people about the MM control arms, but they are a little pricey. Are there any other companies that offer a control very similar. Gemoetry wise and quality wise.

Thank you.

David
 

DW5.0L

Member
May 28, 2005
172
0
16
Florida
I have the MM lowers and FRPP uppers. A good set up in my opinion. The MM's are outstanding quality compared to the lower priced units.
 

cdavego03

Founding Member
Sep 7, 2001
623
0
0
35
Metro Detroit
Visit site
I have finally come to a conclusion that I will have to pick between the following lower control arms:

I can get both for 170 shipped

UPR solid non adjustable

Pro3i solid non adjustable

I am leaning towards the UPR just because I have upr dbl adjustable uppers that will be on the car too.

I think the Pro3i has better bushings though.


Which you do you think is better
 
Thread starter Similar threads Forum Replies Date
0 Hey guys, 01 gt having problems really need some help. SN95 4.6L Mustang Tech 8
B I Really Need Help! 3.8 Engine Swap 1996 - 2004 SN95 Mustang -General/Talk- 6
C I Really Need Help! Fox 5.0 Mustang Tech 13
Melody I need help! Confused about what my car really is... The Welcome Wagon 0
3 I really need help please k member Fox 5.0 Mustang Tech 7
W Really need some help here SN95 4.6L Mustang Tech 5
R Really Really need help with car not starting Classic Mustang Specific Tech 91
Adam95GT Really need help with the focus... 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 13
d.r.moss Can't figure this out, really need help. Fox 5.0 Mustang Tech 4
S problem with the starter. really need help Fox 5.0 Mustang Tech 6
snidehockey REALLY need your guys' help/advice (possibly scammed) 1996 - 2004 SN95 Mustang -General/Talk- 16
Kdubslugga Charging Problems!! Really need some help! Fox 5.0 Mustang Tech 4
stang1986GT Really need help here...BBK header collector stud nut Fox 5.0 Mustang Tech 4
stang1986GT Really need help here... Fox 5.0 Mustang Tech 7
K I really need some help from u guys n gals. sn95 to fox computer swap 1994 - 1995 Specific Tech 18
skunk21 really need some help, TB whistle or not!!! Fox 5.0 Mustang Tech 5
8 two plugs need schematic or help or picture NE thing really Fox 5.0 Mustang Tech 0
mustang6tee8 ABS, really need help! 1994 - 1995 Specific Tech 5
D Ready to buy a rice burner.......Not Really just need help!!!!! Fox 5.0 Mustang Tech 31
bbkgt03 Really really P.O. New problem NEED HELP!! Fox 5.0 Mustang Tech 10
daviszx3 Really need help what wheels to get?? 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 2
Bottomlesspit REALLY need help locating a stock intake tube Fox 5.0 Mustang Tech 4
D I really need some tech help!! Fox 5.0 Mustang Tech 8
Red88 RICK Timing really need help.. Fox 5.0 Mustang Tech 5
mustangGt87 i really need help please Fox 5.0 Mustang Tech 10
mustangGt87 2 things i really need help with Fox 5.0 Mustang Tech 7
A I really need some help (opinions) please... 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 17
M need help really bad! Classic Mustang Specific Tech 3
B Really need your help & advice. SN95 4.6L Mustang Tech 1
droptopford 5 0 need help/ electrical question/ short circuit/ brake problem/I REALLY HATE MY CAR!! 1994 - 1995 Specific Tech 6
slow3gt do i really need valve springs? need help quick SN95 4.6L Mustang Tech 1
The Green GT GUYS I REALLY NEED YOUR HELP 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 4
brandonh06 Need help really badly..... Fox 5.0 Mustang Tech 2
ninety15.0 Really weird problem.....need help ASAP Fox 5.0 Mustang Tech 20
OrangeMustangGt i REALLY Really Need Help! 1994 - 1995 Specific Tech 31
S I really need help with my 85 Fox 5.0 Mustang Tech 3
Pokageek I need help..something is really wrong.. 1994 - 1995 Specific Tech 44
CBZGT50 Really need help finding something. Cobra Fox 5.0 Mustang Tech 1
N my suspension is really ****ed up and i need help Classic Mustang Specific Tech 15
F Really need some help with ignition switch wiring in 64 1/2 Classic Mustang Specific Tech 3
Car RamRod Really need help with MC here, please help me out 1994 - 1995 Specific Tech 5
M Really need help figuring out which rotors I have... Fox 5.0 Mustang Tech 38
M A/C Question..Really need the help!!!! Fox 5.0 Mustang Tech 2
Afastgts95 Do i really need headers and injectors? help SN95 4.6L Mustang Tech 5
2.3Lxhatch311 I really need you guys help on this one 2.3L (N/A & Turbo) Tech 49
TheRedBlur I really need help! 1994 - 1995 Specific Tech 19
4dStang Really need some tech help. Starting problem intermittent Fox 5.0 Mustang Tech 21
6 Really need these parts. Help me out! Classic Mustang Specific Tech 16
70mustangcoupe not my stang this time...but really need help Classic Mustang Specific Tech 8
Turbo Stang I need help really bad... 2.3L (N/A & Turbo) Tech 6
Similar threads