Shifter bushing for RAD 4 speed manual SR4

SKINOW11

New Member
Sep 13, 2021
2
0
1
49712
Hello all,

My shifter bushing are gone on my 1975 Mustang, 4 spend manual, 4 cylinder
Any ideas where a can find the bushing or a new shifter complete with bushing
Would appreciate any leads
THANKS!
 
  • Sponsors (?)


Try here.
 
  • Like
Reactions: 1 users
Thank you! Enzio
I will replace that bushing too, but I am looking for the bushing on top of the transmission...see picture
 

Attachments

  • shifter pic.jpg
    shifter pic.jpg
    23.1 KB · Views: 72
  • shifter pic.jpg
    shifter pic.jpg
    23.1 KB · Views: 68
  • shifter pic.jpg
    shifter pic.jpg
    23.1 KB · Views: 58
That doesn't look like any of the shifters I've removed from 4 speeds from any II I've worked on over the years. They all had a baseplate that was bolted to the tail shaft housing that had 3 bolts. :chin

They looked like these in the pics taken from the link that @Enzio provided.

1631629209793.png

1631629230552.png


:shrug:

I think I have an old shifter or 2 somewhere in my parts pile. If I can find one I'll see about taking better pics of what I'm referring to. I don't remember seeing a bushing like that either. I'm guessing this is a transplant in another application too since that doesn't look like the tunnel of a II. Any chance it's a transmission from something else, like maybe a Ranger? Are there any tags or maybe casting numbers you can reference to locate what, exactly, this transmission is?
 
  • Like
Reactions: 1 user