SOLD! SOLD! SOLD! SOLD! SOLD! SOLD! 
New Never Used Snow Performance Methanol Stage 2 Boost Cooler™ Kit. For extra Horse Power works with any Vehicle....
*****NOTE: My price *275.00 with free 4-1 gal box of Boost Juice.
Suggested Online Price 423.00 ****My Price 275.00 for complete Kit
*Preferred local CA pickup. Shipping at additional cost will be determined by Zip.
*Contact Frank at [email protected]
This kit uses manifold boost pressure to determine when and how much fluid to inject. Proportionally injecting according to boost pressure gives the most accurate delivery of water-methanol and allows the most cooling and performance improvement over the widest range. More power and driveability is the result. It can be used on any forced induction engine: carbureted, fuel injected, turbocharged, positive displacement or centrifugal blowers. The most suitable are the centrifugal supercharged and turbocharged engines, as they build boost is a more progressive manner concerning water-methanol injection. The positive displacement blower engines will work, but it might take more work to dial in the delivery. For higher boost applications (over 25psi), the controller can be upgraded to our VC100 unit.
Kit includes: **See Photos Below
• UHO (Ultra High Output) Pump
• Boot Juice Reservoir
• Variable Controller
• Nozzles To Cover a Wide Range of Horsepower
• All Required Hardware Needed For Installation
****NOTE: Included for Free Boost Juice™ 4 gal case Not shown in PICs but included (Value 31.50)
Boost Juice™ is Snow Performance's proprietary mix of 49% methanol and 51% water. It is made in a controlled environment with special care to make sure the ratios are accurate to result in a high performance water-methanol fluid formulated for use in the Boost Cooler™ injection system. Boost Juice is required.
*Contact Frank at [email protected]
PICS:
New Never Used Snow Performance Methanol Stage 2 Boost Cooler™ Kit. For extra Horse Power works with any Vehicle....
*****NOTE: My price *275.00 with free 4-1 gal box of Boost Juice.
Suggested Online Price 423.00 ****My Price 275.00 for complete Kit
*Preferred local CA pickup. Shipping at additional cost will be determined by Zip.
*Contact Frank at [email protected]
This kit uses manifold boost pressure to determine when and how much fluid to inject. Proportionally injecting according to boost pressure gives the most accurate delivery of water-methanol and allows the most cooling and performance improvement over the widest range. More power and driveability is the result. It can be used on any forced induction engine: carbureted, fuel injected, turbocharged, positive displacement or centrifugal blowers. The most suitable are the centrifugal supercharged and turbocharged engines, as they build boost is a more progressive manner concerning water-methanol injection. The positive displacement blower engines will work, but it might take more work to dial in the delivery. For higher boost applications (over 25psi), the controller can be upgraded to our VC100 unit.
Kit includes: **See Photos Below
• UHO (Ultra High Output) Pump
• Boot Juice Reservoir
• Variable Controller
• Nozzles To Cover a Wide Range of Horsepower
• All Required Hardware Needed For Installation
****NOTE: Included for Free Boost Juice™ 4 gal case Not shown in PICs but included (Value 31.50)
Boost Juice™ is Snow Performance's proprietary mix of 49% methanol and 51% water. It is made in a controlled environment with special care to make sure the ratios are accurate to result in a high performance water-methanol fluid formulated for use in the Boost Cooler™ injection system. Boost Juice is required.
*Contact Frank at [email protected]
PICS:
