Start up help

justangs

New Member
May 24, 2019
21
0
1
Upstate NY
Ok so long story short my winter project snowballed and I ended up with a completely new combo. Was planning on just a turbo and fuel system but it turned into much more and I could use some help getting it fired up. My combo is 70mm 0n3 kit with a dumped exhaust, tw170s, performer rpm2 manifold, 80# S.E.P. injectors and a FTI custom cam. I'll attach a previous file from the car last year that worked well. TIA.
 

Attachments

  • 2019-07-26_06.29.27.msq ac idle change..msq
    117.2 KB · Views: 78
  • Sponsors (?)


here is the cam card
 

Attachments

  • cam specs.jpg
    cam specs.jpg
    245.6 KB · Views: 55
gotcha, I can post a sample file for you to look at. The way the tune is setup is truly dictated by the way the car runs and acts. I have in many instances done very specific tables just for a particular build, mostly to work out drivability issues.
how much boost do you plan on running? it is easier to build the tables at the beginning than to alter them later.

the tune i have attached is near complete for an e303 cammed turbo car running upwards of 14psi
 

Attachments

  • Anti HeroREV2.1.4.msq
    120 KB · Views: 70