Steeda No. 19 cam
- Thread starter 5.0StangRacer
- Start date
-
Sponsors (?)
Mike86Stang
Advanced Member
Hey,
I'm running a #19, idles really smooth considering the duration the cam has.
Makes decent power but I think there are alot better cams out there personally.
As far as the characteristics of it....
My Idle is about 900rpm, has a enough lump in it to know it's not stock
but it won't vibrate the car to death. Driveability is just about perfect.
Power starts to come on at 3k then it really hit's hard right around 4k.
I have reved it cleanly to the limiter without any issues, but it seems like once
it hit's 5000+ rpm it's still reving but it's not pulling hard like it does around 4k.
Kinda like it builds power untill about 5k....then kinda flat lines.
What kind of mods do you have done so far? BTW I'm in columbia (not to far from demascus) if you want to meet up to hear it, or go for a short romp in it to get a
feel for the power band.
Also these are my mods thus far....(Look in my sig for times)
Edelbrock RPM Heads...Holley Systemax II intake...#19 cam.... 1.7's RR...70mm t-body...shorties headers... off road H pipe(when not going for emmissions
... new cat back will be MAC ( the snow we had removed my mufflers for me)...3.73's.
I'm running a #19, idles really smooth considering the duration the cam has.
Makes decent power but I think there are alot better cams out there personally.
As far as the characteristics of it....
My Idle is about 900rpm, has a enough lump in it to know it's not stock
but it won't vibrate the car to death. Driveability is just about perfect.
Power starts to come on at 3k then it really hit's hard right around 4k.
I have reved it cleanly to the limiter without any issues, but it seems like once
it hit's 5000+ rpm it's still reving but it's not pulling hard like it does around 4k.
Kinda like it builds power untill about 5k....then kinda flat lines.
What kind of mods do you have done so far? BTW I'm in columbia (not to far from demascus) if you want to meet up to hear it, or go for a short romp in it to get a
feel for the power band.
Also these are my mods thus far....(Look in my sig for times)
Edelbrock RPM Heads...Holley Systemax II intake...#19 cam.... 1.7's RR...70mm t-body...shorties headers... off road H pipe(when not going for emmissions
... new cat back will be MAC ( the snow we had removed my mufflers for me)...3.73's.
hey man! thanks for all the info, Im currently running BBK CAI with 77mm Pro-m MAF, 70mm bbk TB, TFS Street Heat intake, BBK LT headers, BBK catted H-pipe, Dynomax Race Bullets, 3.73's, Im at college now (Old Dominion University) but when I get back for spring break, I would love to see how the cam runs!, thanks again for all the info
Mike86Stang
Advanced Member
Similar threads
