Ok, before I get started I installed a PI intake about a month ago. I pulled out my water pump went to autozone to get a new o ring and they didnt have any so I had to reinstall my old one, I cleaned it up really well before installation, and lubed it up. Ok well I have noticed a few times on check ups that very small amounts of antifreeze has disapeared. Anywho I was taking her out for a cruise today, and my foot was getting heavy, and it happened at around 5kRPMS it sputtered,( I got a mean second gear scratch, kicked her sideways a little
) now when I drove it home any gear under a fair amount of load it would still act up, new plugs and wires were installed when I did intake, I pulled a few wires and noticed 1 or 2 had a small amount of moisture on the boot. Any Ideas? it seems like bad plugs or corroded ones to me.
) now when I drove it home any gear under a fair amount of load it would still act up, new plugs and wires were installed when I did intake, I pulled a few wires and noticed 1 or 2 had a small amount of moisture on the boot. Any Ideas? it seems like bad plugs or corroded ones to me.
