Progress Thread Tannerc91gt’s Build(s) Thread

  • Sponsors (?)


A8C9DD24-43D5-406A-BD65-23BD75FE5ACB.jpeg

777FA9B8-872C-4082-986E-9F874A510B9E.jpeg


Winter to-do list:

Alignment
-Scale and set suspension
-Rear seat delete/rear interior
-Lights and windows wiring
-Wire in some additional sensors
-add window net, get cage cert’d to 8.50
 
  • Like
Reactions: 1 users
Slowly tackling what turned into a spaghetti monster.
B8F02129-004C-4F23-BB5E-929DE77CC345.jpeg

Not being able to get under the dash to add/modify turned into a mess. After I had some issues Sunday, decided enough was enough. Going to overhaul the starter circuit and while I’m in here, wire up the lights and windows and make it to where the dash cover is easily removable (4 bolts)and all the wiring is accessible underneath.
 
  • Like
Reactions: 1 users
Got the wiring cleaned up. Starter is now wired independent of the rest of the electronics. Hopefully does the trick.
06F69314-E0DE-4B67-9177-0FC68545AD61.jpeg

Also got the radio delete installed, just need to mount the 3.5” touch screen to it.
D1783464-5616-4205-93B5-450A6D2BAD97.jpeg
 
  • Like
Reactions: 5 users
Got the re-wire wrapped up, threw some new headlights in it and mounted an LED behind the dash to help see the relay panel at night. Fired it up and put some heat in it. Need to put some 93 octane in it tomorrow and let it run a bit.
But we’re at least back to square one now. The starter circuit seems a lot happier
B81DF1A1-DB7A-44CD-912C-37D110243EC4.jpeg
EB683C2C-55A7-4D7D-AA16-E84DF23DF708.jpeg
 
  • Like
Reactions: 4 users