Tapered or bolt through bumpsteer kit?

[killer5.0]

MM k member and control arms...car is going to be lowered quite a bit. Cobra rack. 96+ or possibly drop spindles.

Not sure which kit i should get.

 

[Mustang5L5]

MM recommends with the k member kit to use the through bolt version for best range of adjustability.

Do require reaming the spindles to fit though.

 

[CarMichael Angelo]

I've always used the bolt through spindles...and I've always drilled them myself...NOT for the faint of heart..the drill bit is expensive, the drill required even more so,...and if you snag the bit...it's a real bad day.

But..with a drill press, a slow moving drill speed, a sharp bit, and a drill press vise holding everything in place...a piece of pie.