timing chain sprockets help??

[jeffbigwood27]

I am doing a cam swap and i am down to the timing chain. I took the bolt out of the top sprocket and went to slide it off and the bottom crank sprocket is stuck and wont move. Is there an easy way to pop the sprocket off. I thought about a puller but i dont know where i would grab onto the sprocket at.

 

[Fastcat]

I am doing a cam swap and i am down to the timing chain. I took the bolt out of the top sprocket and went to slide it off and the bottom crank sprocket is stuck and wont move. Is there an easy way to pop the sprocket off. I thought about a puller but i dont know where i would grab onto the sprocket at.

Get a big flat head screw driver and pry it from the back till it starts to move, then you should be able to pull the rest of it forward w/ your hands.

EDIT: Actually your gonna have to pry the bottom sprocket by the timing chain. So place the screwdriver behind the bottom of the timing chain and pry

 

[TT91]

give it a shot with a rubber mallet...it should shock it and break free

 

[jeffbigwood27]

thanks i just went down and pulled it off and pulled the cam. i used two big prybar screwdriver things and pulled on both sides at the same time. Ready for the trick flow cam now!

 

[Look Its Aaron]

I think its worth it to put in a new timing chain.

 

[PRO50SC]

I think its worth it to put in a new timing chain.

Yea and a double roller at that!!