Expired Vintage Air, T5 Into 66 Kit, 351c Heads, Gas Caps, Dist, Fuel Pump, Clutch Eq Bar, Pulleys, Carb

Status
Not open for further replies.

acinider

Member
Apr 17, 2002
37
0
17
San Diego, CA
I will ship these items to any location, buyer pays shipping. If you’re local to Clarksville, TN, then I’m fine with in-person pickups also. If you need additional photos or info, just let me know. The link below each item description is to the photos. Thanks!

66 Mustang steel hood. 66 Shelby fiberglass scoop has been installed and hood is painted with primer. Hood has no rust but will require full preparation and paint. $50 OBO.

Autoloc SVPRO5, 8-Channel remotes, 50Lbs solenoids, Remote Shaved Door Kit. This is the top model Autoloc kit with the strongest solenoids to open the heaviest of doors. New and still sealed in plastic. $300 new. $125 OBO.
http://photobucket.com/acinider

351C heads. Top casting: 9170. Bottom casting: 2 D1AE CB Ford. Tag: 351C 71-3 L24 K614J. These heads are from 71-74 fords and are 2V. They are assembled with valvetrain and are in need of a rebuild. $50 OBO.
http://s1291.photobucket.com/albums/b555/acinider/Classic%20Mustang%20Parts/

68/69 Mustang Distributor: Casting is C8DF-12127-D 9E28 Autolite. $25 OBO.
http://s1291.photobucket.com/albums/b555/acinider/Classic%20Mustang%20Parts/

Fuel pump: mechanical. AC model H9 6837. $10 OBO.
http://s1291.photobucket.com/albums/b555/acinider/Classic%20Mustang%20Parts/

66 V8(non HiPo) Mustang clutch equalizer bar. $20 OBO.
http://s1291.photobucket.com/albums/b555/acinider/Classic%20Mustang%20Parts/

65-70 Mustang crank pulleys: C9OE-8509-F (5.75” dia), C9OE-?512-D (6” dia), and a 5.5” diameter pulley. All are single v-belt models. $10 OBO.
http://s1291.photobucket.com/albums/b555/acinider/Classic%20Mustang%20Parts/

Motorcraft (Autolite) 2100 carb from 1970 Ford. Has Motorcraft and 1.21 castings. 1.21 = 351CFM. Has “Quality Remanufactured” sticker on top of body. $25 OBO.
http://s1291.photobucket.com/albums/b555/acinider/Classic%20Mustang%20Parts/

65 & 66 Mustang gas caps. Used. $10 each OBO.
http://s1291.photobucket.com/albums/b555/acinider/Classic%20Mustang%20Parts/

66 Mustang brake pedal for auto trans. $20 OBO.
http://s1291.photobucket.com/albums/b555/acinider/Classic%20Mustang%20Parts/

66 Mustang white sun visor, new. Fits either side. $10 OBO.
http://s1291.photobucket.com/albums/b555/acinider/Classic%20Mustang%20Parts/

65-68 Mustang Coupe rear window weatherstrip. Model C5ZZ-6542084. Premium American made model. Approved by Mustang Club of America. New in sealed package. $20 OBO.
http://s1291.photobucket.com/albums/b555/acinider/Classic%20Mustang%20Parts/
 
  • Sponsors(?)


boss_302

Member
Aug 7, 2005
49
0
7
mustangland
community.webshots.com
how much to ship to ca 92065 items below
The first items are everything needed to install a T5 trans into a 66 Mustang. If you want everything, then it’s $475 OBO. Everything includes the T5, trans yoke, Hurst shifter, Bellhousing, bellhousing cover, clutch fork, Hydraulic clutch kit, and T5 crossmember my email [email protected]
 

M66

New Member
Jun 23, 2013
0
1
1
Los Angeles, CA
Do
I will ship these items to any location, buyer pays shipping. If you’re local to Clarksville, TN, then I’m fine with in-person pickups also. If you need additional photos or info, just let me know. The link below each item description is to the photos. Thanks!

66 Mustang steel hood. 66 Shelby fiberglass scoop has been installed and hood is painted with primer. Hood has no rust but will require full preparation and paint. $50 OBO.

Autoloc SVPRO5, 8-Channel remotes, 50Lbs solenoids, Remote Shaved Door Kit. This is the top model Autoloc kit with the strongest solenoids to open the heaviest of doors. New and still sealed in plastic. $300 new. $125 OBO.
http://photobucket.com/acinider

351C heads. Top casting: 9170. Bottom casting: 2 D1AE CB Ford. Tag: 351C 71-3 L24 K614J. These heads are from 71-74 fords and are 2V. They are assembled with valvetrain and are in need of a rebuild. $50 OBO.
http://s1291.photobucket.com/albums/b555/acinider/Classic%20Mustang%20Parts/

68/69 Mustang Distributor: Casting is C8DF-12127-D 9E28 Autolite. $25 OBO.
http://s1291.photobucket.com/albums/b555/acinider/Classic%20Mustang%20Parts/

Fuel pump: mechanical. AC model H9 6837. $10 OBO.
http://s1291.photobucket.com/albums/b555/acinider/Classic%20Mustang%20Parts/

66 V8(non HiPo) Mustang clutch equalizer bar. $20 OBO.
http://s1291.photobucket.com/albums/b555/acinider/Classic%20Mustang%20Parts/

65-70 Mustang crank pulleys: C9OE-8509-F (5.75” dia), C9OE-?512-D (6” dia), and a 5.5” diameter pulley. All are single v-belt models. $10 OBO.
http://s1291.photobucket.com/albums/b555/acinider/Classic%20Mustang%20Parts/

Motorcraft (Autolite) 2100 carb from 1970 Ford. Has Motorcraft and 1.21 castings. 1.21 = 351CFM. Has “Quality Remanufactured” sticker on top of body. $25 OBO.
http://s1291.photobucket.com/albums/b555/acinider/Classic%20Mustang%20Parts/

65 & 66 Mustang gas caps. Used. $10 each OBO.
http://s1291.photobucket.com/albums/b555/acinider/Classic%20Mustang%20Parts/

66 Mustang brake pedal for auto trans. $20 OBO.
http://s1291.photobucket.com/albums/b555/acinider/Classic%20Mustang%20Parts/

66 Mustang white sun visor, new. Fits either side. $10 OBO.
http://s1291.photobucket.com/albums/b555/acinider/Classic%20Mustang%20Parts/

65-68 Mustang Coupe rear window weatherstrip. Model C5ZZ-6542084. Premium American made model. Approved by Mustang Club of America. New in sealed package. $20 OBO.
http://s1291.photobucket.com/albums/b555/acinider/Classic%20Mustang%20Parts/
Do you still have the door opener for sale? Please call me at 818-681-6328 if you do.
 
Status
Not open for further replies.
Thread starter Similar threads Forum Replies Date
acinider 1965-66 Vintage Air Factory Fit AC Kit Engine and Power Adder 0
P Vintage Air Install Help Needed. 1965 - 1973 Classic Mustangs -General/Talk- 8
palacekeeper Adding Vintage Air A/c To 1970 Mach 1 1965 - 1973 Classic Mustangs -General/Talk- 3
jackson0215 Vintage Air Power Help Classic Mustang Specific Tech 1
jackson0215 Vintage Air or Classic Air Classic Mustang Specific Tech 9
Z06killinSBF Vintage Air guys Classic Mustang Specific Tech 5
D WTB/Trade 80's vintage MUSTANG mud flaps Interior Exterior Parts 1
Nicole Kanigina Steering Wheel For 2000 V6 1996 - 2004 SN95 Mustang -General/Talk- 2
B Gear Jam Vintage Drags, Car Show And Swap Meet Is April 14-15 Regional Forums and Event Information 0
B South East Gear Jam Vintage Drags, Car Show And Swap Meet Is April 14-15 Regional Forums and Event Information 0
bchampion Problem With New Vintage Usa Performance Series Tach 1965 - 1973 Classic Mustangs -General/Talk- 3
S Essex V6 Into Vintage Mustang, Anyone Done? Classic Mustang Specific Tech 7
gikort 1,000+ Mile Vintage Race 1965 - 1973 Classic Mustangs -General/Talk- 3
T New Vintage Owner Looking For Advice On Wheel Packages 1965 - 1973 Classic Mustangs -General/Talk- 10
mikec35 Wheels-Tires 67 Shelby clone, Shelby 10 spokes or Vintage Wheels v50 Classic Mustang Specific Tech 3
J Watkins Glen International Vintage Mustang Event Regional Forums and Event Information 0
StangerJon Vintage Venom 13" brake setup Classic Mustang Specific Tech 1
H Vintage Mustang & Ford Car Show Sept 26, 2010 1965 - 1973 Classic Mustangs -General/Talk- 3
1995cobraR Vintage master cylinders (65/66) Wheels/Tires/Brakes 0
M Buy, Sell, Trade Classic Cars and Vintage Auto Parts Interior Exterior Parts 0
B Vintage Wheel Works V45 wheels Fox 5.0 Mustang Tech 0
nemlio65 Vintage mustang restoration shop in the Boston area Classic Mustang Specific Tech 1
HistoricMustang 6th Annual "Augusta Vintage Nationals" 1965 - 1973 Classic Mustangs -General/Talk- 2
hipo wannabe vintage style 289 build Classic Mustang Specific Tech 20
tx65coupe YOM Registration (vintage plates) 1965 - 1973 Classic Mustangs -General/Talk- 4
'13_ImpactBlue_GT Vintage 1968 Mustang commercial 1996 - 2004 SN95 Mustang -General/Talk- 1
MustangLX-5.0 Zymol Vintage Glaze 22 oz - $2500 WTF??? Mustang Sound & Shine All 6
85_SS_302_Coupe Pics of some vintage Mickey Thompson valve covers i restored 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 3
reenmachine The Reenmachine '65 Fastback Vintage Racer Unveiled! Classic Mustang Specific Tech 11
Grantiz84 anyone have pics of the vintage 48 wheels on a classic mustang? 1965 - 1973 Classic Mustangs -General/Talk- 0
B Vintage Magnum 500 rims on an '05+? 2005 - 2014 S-197 Mustang -General/Talk- 9
G Vintage drag racing footage Classic Mustang Specific Tech 3
H Vintage Mustang & Ford Car Show Autobahn Country Club Joliet 1965 - 1973 Classic Mustangs -General/Talk- 2
H Vintage Mustang & Ford Show Autobahn Country Club Joliet Regional Forums and Event Information 1
66 Restomod Modern Vintage Auto? Classic Mustang Specific Tech 1
2 VINTAGE RACES June 30,2007 Regional Forums and Event Information 3
RStangsOC Vintage Race Cars On Display - Irvine, CA Regional Forums and Event Information 0
H 66 with 17" Vintage 45's Classic Mustang Specific Tech 12
KcMstang Found my first vintage mustang! 1965 - 1973 Classic Mustangs -General/Talk- 8
C Anybody using vintage venoms brakes? Classic Mustang Specific Tech 7
65ShelbyClone Vintage 48s, but in 15x7 or 15x8? Classic Mustang Specific Tech 8
Capt Dan Vintage 50's on a coupe? 1965 - 1973 Classic Mustangs -General/Talk- 4
atomicpunk Pics of 17" Vintage 50s on a classic? Classic Mustang Specific Tech 2
washMO66 Car pics w/ my vintage 50's and new seats Classic Mustang Specific Tech 22
DarkoStoj Brand new Vintage 45 wheels and Goodyear Tires in Michigan Engine and Power Adder 0
Travis77 custom vintage interior Classic Mustang Specific Tech 14
66blue mustang Vintage Auto Works? 1965 - 1973 Classic Mustangs -General/Talk- 6
washMO66 Vintage Wheel Works, Vintage 50's Engine and Power Adder 0
DarkoStoj Brand new Vintage 45 wheels and Goodyear Tires in Michigan Engine and Power Adder 0
S post pics of your vintage race car replicas Classic Mustang Specific Tech 7
Similar threads