What set-up to use the release crankcase pressure (2V)

[Blackone51]

Was wondering what set-up you (2V) guys are using? I was looking at MMR, Moroso breather kit.
Modular Mustang Racing

Anyone have pics of their set-ups and how did you delete the PVC system?
Thanks much

 

[tag4car]

i bought this catch can on ebay and plumbed it in for under $50
works absolutely as well on a 2v
http://cgi.ebay.com/ebaymotors/Univ...ptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

 

[trombonedemon]

Yea, smart move you can find one for like 25 bucks off ebay, just use it one on both valve covers and don't use the vacum by the lower intake, it makes a horrible oil sucking off your bearings type of noise. Yea big mistake. It took me a few tries before findin a practical setup! I can show you mine if you want.]

 

[Blackone51]

Yea, smart move you can find one for like 25 bucks off ebay, just use it one on both valve covers and don't use the vacum by the lower intake, it makes a horrible oil sucking off your bearings type of noise. Yea big mistake. It took me a few tries before findin a practical setup! I can show you mine if you want.]

Sure would really appreciate that, I'm trying to cover all my bases before the blower is finished. I just installed my D1 procharger head unit tonight, and my buddy at work is welding my tial 50mm BOV and closing where the bypass hoses went as we speak. I'm getting close to firing it up.

 

[tag4car]

then you definitely need a catch can if you are FI now, 100 miles after i put mine on i already had a nice film of oil covering the inside of the tank