What you guys say for my Combo

Slow5.0

Active Member
Feb 13, 2003
2,554
0
46
Portland, OR
I just bought TFS Twisted Wedge heads milled .030 with 6.870 pushrods , FordMotorsport 1.6 rocker arms , Anderson Ford Motorsport B-31 cam
I know I need 24lbs injectors and bigger MASS and bigger TB
I hope so this have to bring me in 300HP at wheels , right now with mods in sign I have 230HP 278TQ and run 14.1@97 with 2.0 60ft.
 
  • Sponsors (?)


yellow5.0cobra said:
milled 0.030 will kiss boost goodbye.

so its gonna be a juice motor.

Meybe, On ANdersonFordMotorsport website said

B-31
N2O or S/C 8-15 lb 302 c.i.d. Best performer for 1.6 R.R., stock pistons and 6200 rpm. Great with TFS or Edelbrock heads. Minimum 30lb injectors and 80mm mass air. Recommend 3.55 or 3.73 gears. Good drivability down to 1900 rpm, mild idle, rpm range 2400-6200, works good with 89-95 EEC, needs 2600-3000 converter. Great N.A. cam for 94-95 Mustang with great drivability.

So meybe I gonna get some juice , never know
 
yellow5.0cobra said:
yea but since u milled the heads, they RAISED compression a bit.

hence... undoable for reliable boost.

I didn't milled heads, guy who own before did that, he have 87 Mustang stock short block 302 with AOD and yes he run 100 shot of nitrous
With NO2 he runs on ET 11.0@123 / without NO2 12.3