Where To Get E-brake Parts For 5 Lug Swap

[mustanglx91]

I'm doing a 5 lug swap and I have the two sn95 style cable hooked to the calibers but I need the rod that goes to the handle. Where can I get this? Also does anyone have a link or detailed pics of what to weld and modify to the e-brake handle. Thanks

 

[cdurbin]

I posted a write up on here a year or so ago.
Attached is a PDF with the information I think you are looking for.
Good luck

 

[elarm1]

www.latemodelrestoration.com

 

[mustanglx91]

Thanks the file is a big help. I looked on lmr I saw the cables but not the rod. I'll look again.

 

[cdurbin]

Thanks the file is a big help. I looked on lmr I saw the cables but not the rod. I'll look again.

What rod are you talking about? The cable that connects to the Ebrake handle has a threaded "rod" portion attached to it.

 

[mustanglx91]

http://www.latemodelrestoration.com...ront-Parking-Brake-Cable-For-Rear-Disc-Brakes.

Thought I needed that piece to attach to the two cables.

 

[cdurbin]

http://www.latemodelrestoration.com...ront-Parking-Brake-Cable-For-Rear-Disc-Brakes.

Thought I needed that piece to attach to the two cables.

You should only have to buy 3 cables total. The one short one that runs from the brake handle and then the 2 that run to the left and the right. The 2 in the back are the same part number.

 

[mustanglx91]

Ya I have the 2 in the rear. Its the piece for the handle I'm missing.