Hi guys, so I’m relatively new to this forum and I would like to hear from some people who can tell me a little more about what would make my car reach 300rwhp. I would like to start of by saying I don’t want nitrous oxide or any boost. I just want naturally aspirated. I don’t plan on any suspension upgrades yet although I know it’s going to be a must later for hooking.
Let’s start off by saying I blew my motor and I’m rebuilding it. I’m going to be rebalancing the whole bottom end and using forged pistons and arp bolts that’s about it. For the items I will be using to help you gauge the power I will be creating I will list them now. I have a set of gt40 heads not porter my plan to later, a krower level 3 cam (part number 15513) .512 intake .531 exhaust, trickflow street burner I believe upper and lower intake, 24 pound injectors, 70mm throttle bod, roller rockers, 3:55 gears in the rear, a little dinky cold air intake, and arp studs and that good stuff. Please give me any tips to help me reach 300rwhp. If that doesn’t already. Thank you all in advance!
Let’s start off by saying I blew my motor and I’m rebuilding it. I’m going to be rebalancing the whole bottom end and using forged pistons and arp bolts that’s about it. For the items I will be using to help you gauge the power I will be creating I will list them now. I have a set of gt40 heads not porter my plan to later, a krower level 3 cam (part number 15513) .512 intake .531 exhaust, trickflow street burner I believe upper and lower intake, 24 pound injectors, 70mm throttle bod, roller rockers, 3:55 gears in the rear, a little dinky cold air intake, and arp studs and that good stuff. Please give me any tips to help me reach 300rwhp. If that doesn’t already. Thank you all in advance!
Last edited: