2001 cobra front & rear Eibach spring install

[01LaserRedCobra]

I was just curious if there is a special way the Eibach springs are supposed to be installed? Is the lettering on the spring supposed to be upside down? Or so you can read it?

Also if you have any position tips for the springs that would be great.


Thanks in advance....

 

[Taz]

I was just curious if there is a special way the Eibach springs are supposed to be installed? Is the lettering on the spring supposed to be upside down? Or so you can read it?

Also if you have any position tips for the springs that would be great.


Thanks in advance....

If the Eibachs are anything like the H&R's, the lettering should be right-side up, i.e. top of letters toward top of car. As far as spring positioning, mark the position of the bottom pigtails on your original springs before removing them to ensure you get the new ones oriented the same way.

T-

 

[OlderGuy]

Here is what it says on the Eiback FAQ:

Is there a hint how to install the Pro-Kit spring? Index
Yes! The springs have to be installed that side up that you can read the printing.

Here's the link:
http://www.eibach.com/index1.htm