Estimated Rear Wheel numbers....

[Black93SVT]

Ok with flowtech shorties offroad H and 2 chamber flows everything else stock i put down 215rwhp and 282rwtq. Now heres the list of mods.....

Scorpion 1.7 RR's
Accufab 65 mm TB and Spacer
TFS Street Heat Intake
75mm Pro-m
Underdrive pulley's
BBK Long tubes and Short H pipe
BBK Cold Air

With just exhuast I ran whats in my sig... any ideas what i'll run with the above mods, 3.73's and a set of BFG Drag Radials?

 

[Bad Animal]

probably about 245hp and 300 tq. I would guess that the car should go 13.4-13.6 if you can drive!!!! ITS ALL IN THE LAUNCH! You need to get your sixty foot times down to at least a 1.8!!!!!! GOOD LUCK!!!!

 

[StreetStang37]

im guessing 240-245 ish as well. MAYBE even 250. MAYBE...

 

[Black93SVT]

what do yo guys think an e-303 or trickflow stage one would be worth for a little bit more power.... my goal is around 260-265. Could i still run the 1.72's with one of those cams or would i have some piston to valve clearance problems?

 

[8urlt1]

put some light weight wheels on it and hit the 12 mark. no reason you shouldnt, being that you went 14.0 with stock gears and street tires.