A Pillar ??
- Thread starter xAchillesx
- Start date
-
Sponsors (?)
MT1083
New Member
I was never able to find one. If you do, please post up and let everyone know because I will switch mine if I ever find one. I just used the dual pod and attached it to my pillar.
95CobraStang
Member
MT1083 said:
Do you have a pic of your gauge setup? I think I've decided on the Saleen style dash pod, but always lookin for a nice pillar setup.
95CobraStang
Member
Blue Blurr
New Member
try partshopper? look in the back of mustangs mags and go to all the different sites in the adds. try summitracing.com
I believe mustang tuning carries them, I was looking for them my self
check out the magazine muscle mustangs and fast fords , It has all kinds of part suppliers in there . Problem with mine is i have the mach sound and can only get the dual pod. hope that helps
check out the magazine muscle mustangs and fast fords , It has all kinds of part suppliers in there . Problem with mine is i have the mach sound and can only get the dual pod. hope that helps
MT1083
New Member
95CobraStang said:
I've never been to the track. I don't really have any around here. I'm a really sucky driver anyway, so I wouldn't do the KB crowd any justice.
MT1083
New Member
95CobraStang said:
I can email you a pic if you want. Just pm your address and I'll try to get one to you today or tomorrow.
RTRMustangGT
New Member
- Sep 30, 2004
- 43
- 0
- 0
I was not aware that there was any difference but on my gauges the gauge pod did not replace the stock pillar cover. I had to still use the factory pillar behind the new one. i had to drill 5 holes in the factory pillar cover in order to mount the new pillar on it. my gauge pod is an autometer. i know someone makes them because i have seen many verts with them.
COBRA90GT
Mod Dude
It seems like the A-pillar gauge pod (full length) offered by "Speed of Sound" is starting to become a popular alternative to the typical Autometer or Lotek (Lotec ? ) A-pillar installations.
Here's a link to a recent thread over on SVTPerformance:
http://www.svtperformance.com/forums/showthread.php?t=122469
Just some food for thought...
Here's a link to a recent thread over on SVTPerformance:
http://www.svtperformance.com/forums/showthread.php?t=122469
Just some food for thought...
GTVertY2K
New Member
MT1083
New Member
I just found that gaugepods.com site about 45 minutes ago. I can't believe I never found that before! I asked if they had a dual gauge pillar though instead of the triple. I'll let you know what they say.
COBRA90GT
Mod Dude
GTVertY2K said:
FWIW, in case anyone was wondering what the correct part number for Medium Parchment is (2001 Cobra), it is: M4JZ 19M547 1078H - matches up to the color on the A-pillar.
alanw6
Member
COBRA90GT said:It seems like the A-pillar gauge pod (full length) offered by "Speed of Sound" is starting to become a popular alternative to the typical Autometer or Lotek (Lotec ? ) A-pillar installations.
Here's a link to a recent thread over on SVTPerformance:
http://www.svtperformance.com/forums/showthread.php?t=122469
Just some food for thought...
I really wanted to reply to this post a few days ago when I found it, but wasn't comfortable doing so. Speed of Sound is my company, and the gauge pillar is our first production product. We do a good bit of custom parts as well.
A procharger install on an 01 cobra vert led us to this design. We did not like any of the parts available at the time, so we made one by hand (it's the parchment one in my gallery). Made a few more on special request, then it just snowballed from there.
My part costs a little more than the others, but I can guarantee it's quality, fit, and finish surpass my competition by an enormous distance.
Thanks for the mention, it's really hard to avoid posts like this in fear of "spamming" the board I started on when I bought my stang in 02.
Thanks,
Alan
Similar threads
