AFR/FTI Combo Results?

[Killercanary]

I hope they are not 6.250" as our stock length is 6.272"

 

[Stangfreak95]

I hope they are not 6.250" as our stock length is 6.272"

Thats exactly what I was thinking

 

[5.0-Steve-O]

They were 6.250", what pushrods should I buy, the AFR site says these heads require hardened pushrods.

 

[homerojr]

Thanks for answering Jason, Killer an Final5-0. If I finally decide on stud mount, what more parts should I look for? ju$t new rockers? (I wanted tt keep my rockers to save some...)

 

[Killercanary]

New rockers and pushrods. I also went pedestal to save money from having to buy pushrods... I ended up needing them anyway. Do yourself a favor and just bite the bullet and get stud mount.

Steve, its actually best to NOT buy pushrods until the heads are on the block and you can check geometry. Buy a pushrod length checker and checker springs. They are not much money at all, use them to check the length you need and then buy your pushrods. Most do get away with the stock length with AFR's, but its always good to check.

 

[Jason@AFR]

New rockers and pushrods. I also went pedestal to save money from having to buy pushrods... I ended up needing them anyway. Do yourself a favor and just bite the bullet and get stud mount.

Steve, its actually best to NOT buy pushrods until the heads are on the block and you can check geometry. Buy a pushrod length checker and checker springs. They are not much money at all, use them to check the length you need and then buy your pushrods. Most do get away with the stock length with AFR's, but its always good to check.

In short, I thank you...do you have any idea how many times a day I say that exact same thing :worship: glad to hear somebody take the words out of my mouth.

Jason

 

[5.0-Steve-O]

Alrighty then well I'll see what happens when I put the heads on, at least I only paid like 20 bucks for the pushrods.