- Apr 6, 2005
- 27
- 0
- 0
After some time of searching with no luck for a wiring harness I decided to go ahead and just ripe the wires out of the harness and test them out and then hard wire it all toghether. It took about 5 hours and a few major bumps to get over, but really wasn't that bad. If I knew what every thing was before I started it would have probablly only took 2 hours.
The back of the shaker 500 has 3 seperate harness's, the largest has about 13 wires(for power and speaker output) the second has two wires(for illumination power+control) and a third(runs to the subwoofers.)
The first one has all you need, provided you don't want to hook up those crappy subs that came with the car. I am running the stock speakers off a clarion head unit, and also I have a 10" Audio Bahn excursion sub in a box in the truck. This one sub is 10x louder and has way better quality then the two stock subs.
If anyone wants to see them I have pics, and I can write out which wires are which....
The back of the shaker 500 has 3 seperate harness's, the largest has about 13 wires(for power and speaker output) the second has two wires(for illumination power+control) and a third(runs to the subwoofers.)
The first one has all you need, provided you don't want to hook up those crappy subs that came with the car. I am running the stock speakers off a clarion head unit, and also I have a 10" Audio Bahn excursion sub in a box in the truck. This one sub is 10x louder and has way better quality then the two stock subs.
If anyone wants to see them I have pics, and I can write out which wires are which....