craig gaines Founding Member Jul 23, 1998 356 0 17 DuQuoin, Illinois Jul 4, 2005 #1 Jul 4, 2005 #1 So, if I go to put my explorer intake on, with the 65mm throttle body, if I bore out the egr valve to match 65mm, will it hurt how the egr works?
So, if I go to put my explorer intake on, with the 65mm throttle body, if I bore out the egr valve to match 65mm, will it hurt how the egr works?
BlackFox5.0 Founding Member Aug 7, 2000 3,514 1 0 Massachusetts Jul 4, 2005 #2 Jul 4, 2005 #2 The valve or the spacer? The spacer should already be 65mm I think.
04sleeper Founding Member Jun 22, 2002 2,674 14 89 Dallas, TX Jul 4, 2005 #3 Jul 4, 2005 #3 No it will not hurt it. I have done this before. The best tool I found to do this was a 3 inch sanding tool that hooks to a drill. It has a bunch of flaps of sandpaper that make up a 3 inch circle. Not sure what it was called but it worked Great!
No it will not hurt it. I have done this before. The best tool I found to do this was a 3 inch sanding tool that hooks to a drill. It has a bunch of flaps of sandpaper that make up a 3 inch circle. Not sure what it was called but it worked Great!
04sleeper Founding Member Jun 22, 2002 2,674 14 89 Dallas, TX Jul 4, 2005 #4 Jul 4, 2005 #4 This is what I used. View attachment 510347
BlackFox5.0 Founding Member Aug 7, 2000 3,514 1 0 Massachusetts Jul 4, 2005 #5 Jul 4, 2005 #5 Thats called a flap wheel.
W wildstang87 New Member Jun 9, 2005 96 0 0 Jul 4, 2005 #6 Jul 4, 2005 #6 just go to the part store and get a 3in 3stone cylinder hone, shouldnt be but about 10-15 bucks.
04sleeper Founding Member Jun 22, 2002 2,674 14 89 Dallas, TX Jul 4, 2005 #7 Jul 4, 2005 #7 BlackFox5.0 said: Thats called a flap wheel. Click to expand... Thanks. I described the name in my previous post but wasn't sure of the name.
BlackFox5.0 said: Thats called a flap wheel. Click to expand... Thanks. I described the name in my previous post but wasn't sure of the name.
cjman15 Banned Apr 15, 2004 1,009 0 0 Fairfield, PA Jul 4, 2005 #8 Jul 4, 2005 #8 Good to hear, at least I can re-use my EGR plate when I upgrade my t-body...... right-o
craig gaines Founding Member Jul 23, 1998 356 0 17 DuQuoin, Illinois Jul 4, 2005 #9 Jul 4, 2005 #9 I just figured I'd take it to work and use the horizontal mill with a boring bar. Thanks for the input guys.
I just figured I'd take it to work and use the horizontal mill with a boring bar. Thanks for the input guys.