351C 2V long tube headers

[Oldskool]

Any suggestions on sources for quality headers for a 351C (2V heads) in a 1970 Mustang with the following specs?

1 7/8" diameter equal length 30" long primaries into a 3" to 3 1/2" collector

The headers will need to clear a TCP power rack & pinion setup. The stock starter has been replaced with a smaller aftermarket unit to help with header clearance, and the 351C is mated to a 4R70W 4-speed automatic. The engine currently has Hedman headers (1 5/8" unequal length primaries into 3" collectors).

Thanks!

 

[Gud T.B. Blown]

try these guys http://www.fordpowertrain.com/opening.htm

 

[shotsy]

I used these hookers in my 70 coupe, and they cleared the PS but it was tight going in. Didnt have to dimple any of the pipes or anything!!!

http://store.summitracing.com/partdetail.asp?autofilter=1&part=HOK%2D6913HKR&N=115+4294923429+4294839039+400390+4294908331+4294840125+4294889095+4294925081+4294908282+4294895343&autoview=sku

 

[Oldskool]

Shotsy - Thanks for the real world recommendation! I just ordered a pair from Summit.

 

[69 Rustang]

I am curious if the Hedmans you are currently running clear the TCP R&P? I have the same setup less the R&P--haven't decided which R&P to get yet.