Front Emblem?

[haze1995]

Does anyone know if they make a black pony emblem for the 2005 and up mustangs?

 

[Mustang78]

the horse in the grille? just paint it black..

 

[haze1995]

That was my first thought, but Im not one to just paint over plasti-chrome.

 

[Mustang78]

prep it right and use a primer or adhesion promoter.. if it chips you did something wrong and re-prep and paint it again.. get a rattle can of clearcoat to make it shiny. I usually use satin black with a clear over the top and it turns out pretty nice and doesn't fade as bad as straight satin will

 

[5.opala]

you could get a rattle can of black laquer, Pardon the spelling, at any parts store. it does a great job very close to the black body color. just sand the horse with 500 grit spray 2-3 medium coats of primer and 2-3 medium coats of the black. thats what I would do.

ryan

 

[haze1995]

just rattle canned the emlems. You can see them here: http://forums.stangnet.com/showthread.php?t=751115

 

[Mustang78]

they look like you rattle canned em.. i would put some clearcoat over the front one at least, bring out the shine but still not glossy

 

[SVTdriver]

Well a little too late for this emblem

http://www.caswellplating.com/vht/duplicolor_metalcast.html
The smoke looks pretty good. I did it to my spare emblem just to see what it would look like. Though since I lost it while moving. I really cannot take a picture of it. But the paint works well. And it still keeps some gloss.