Can someone snap a picture for me?

[xoxbxfx]

I bought a project car years ago and now I cant remember how the weatherstripping/moulding goes on a 65-66 coupe. Looking for a picture of the trim right around the window/roof line.

THANKS

Here is an old picture...it sits just about the same way it did when I took the picture. Finally got some motivation to work on it...figured out the damn computer wiring harness today though

View attachment 308445
View attachment 308446

 

[gonzothegreat]

Is this picture useful for you?

 

[xoxbxfx]

Is this picture useful for you?

I need the door window/roofline...sorry about that, I should have said the door weatherstripping.

Thanks though
Tim

 

[10secgoal]

No pics, but a customer just called and asked about this the other day. The tab that will have the screw will go on the forward par of the car. And if I remember what he asked, and the answer(don't have one here this time to look at), the rubber block starts at the end of the stainless.Hope it helps.

 

[Tony R]

It looks like you removed your gutters. If so can you snap a couple photos of how you finished up on the underside where your weatherstripping is going and did you remove the little pop out detail that is behind the gutter above the door. I hope this makes sense to you. here is a pic of what I am talking about around the door opening.

 

[xoxbxfx]

It looks like you removed your gutters. If so can you snap a couple photos of how you finished up on the underside where your weatherstripping is going and did you remove the little pop out detail that is behind the gutter above the door. I hope this makes sense to you. here is a pic of what I am talking about around the door opening.

I will snap some pics...but it's not pretty I dont know how on earth Im going to do the weatherstripping.

 

[Tony R]

I'm in the process of replacing my roof and trying to figure out how to finish around the opening. I have a few ideas but would like to look at what others have done. I am worried that my weather stripping is not going to be sufficient to keep out the water especially with out the gutters.

 

[dharrelson]

.....I bought a project car years ago and now I cant remember how the weatherstripping/moulding goes on a 65-66 coupe. Looking for a picture of the trim right around the window/roof line.

THANKS....

Here's scans of the body assembly manual for what you want.

 

[xoxbxfx]

Here's scans of the body assembly manual for what you want.

THANKS!! That is a big help. Since I cut off the drip rails, I just need 2,3, &4.

 

[xoxbxfx]

well, here are the pics. To be honest...I wasnt planning on cutting that far back. I was planning on cutting more like your car.... got a little carried away with a sawzall

View attachment 308366

Not straight...going to have to get a pro body guy to straighten them out
View attachment 308367
Underside is still the same
View attachment 308368
View attachment 308369

 

[Tony R]

thanks. I was trying to figure out how to make a drip edge to hide the mouldings a little. I am undecided on trying to remove the little pop out above the door like you did.