How low is to low?

[007]

I have H&R Super Sports... two inch drop. I scrape my K member ALL the time.

Those damn vert springs!! Why did H&R make the vert springs lower than the coupes!?!?! If you want your car to sit level and to avoid the scrape, change the front springs only for Roush springs. My car has been perfect ever since. No scrapeage!!!

 

[tag4car]

at my lowest point, would barely clear a 2x4

 

[swl987]

How thick are the stock isolators? I have steeda springs and it's still too high. I'm thinking of taking out the isolators.

 

[tag4car]

How thick are the stock isolators? I have steeda springs and it's still too high. I'm thinking of taking out the isolators.

id say maybe 1/16-3/16" max. i don't have them in the rear, me and my guys at the tire shop came up with a sneaky and cheap solution.. not wrapped in tape either..

 

[swl987]

id say maybe 1/16-3/16" max. i don't have them in the rear, me and my guys at the tire shop came up with a sneaky and cheap solution.. not wrapped in tape either..

Well, what is the solution?

 

[tag4car]

a couple micro cable ties around the top round.

 

[4.6andSlicks]

I dropped it 1.5 inches and I scrap bottom everywhere. Going down a wavy country road it scraped at 30 miles an hour.

 

[bobc83]

I have the eibach pro-kit and it's too much wheel gap for me.

Anyone have sportlines with the Iso's still in place? How does that work, because I too have a set of LT's sitting in the shop.

 

[mustang50v8]

this is too low

[/QUOTE]



that is all.

 

[whitemustang89]

wow.... just wow on that s197... but what shocks are you guys using? factory?