Problem with Door lock selinoid (?)

[Tonyyak]

Hey guys, need a site that shows in pictures how the locking selinoid(?) is mounted on a 90 LX.... Thanks

 

[Dr_EluSivE]

i dont have a picture, but i can tell you it is attached to a rod with a hooked part on the end of the actuator, and the actuator is Riveted to the latch end of the door a few inchs below the latch. To remove, drill out the rivet, To replace.. thread the hook into the rod, and then rivet it back on.

Dr.

 

[glowstang93]

Here is a link where I did the retrofit, should help you some.

http://www.stangnet.com/mustang-forums/753946-door-lock-actuator-retrofit-bomb.html