Search results

  1. 6

    console light wiring 64-66

    Console Door Spring Tech - CJ Pony Parts, Inc. CJ shows the wiring for the ground and the hot for the console light socket routed through the holes that screw the console to the floor bracket for the front of the console. That does not seem right to me sharing a mounting hole with hot and...
  2. 6

    What side for seatbelt release?

    Are the belts with the release on the trans hump for front seats and outboard for the rear seats?
  3. 6

    Where to buy 1/2" fuel sending unit for stock tank?

    I know its out there, saw it months ago but didn't save the site and my history is long gone. They had an option for 8AN fitting or barbed tube end. They had them for fords and mopar. My "quiet" edlebrock pump screams for mercy trying to pull fuel thru the repop stock pickup tube. Remember...
  4. 6

    09 hot rod power tour

    Will I be seeing any of you along the way? I plan on doing the long haul again this year. 2009 Hot Rod Power Tour Dates, Schedule, Registration and Hotel Information - Hot Rod Magazine
  5. 6

    66 console lighting locations

    what is the hole shaped like a cross in the back panel of the console storage bin for? Ive got the socket in the top of the box, would there be another socket somewhere under there?
  6. 6

    where to find 79-82.5 3 spoke wheels

    anyone have a lead on finding the old 4 bolt 3 spoke wheels used on 79 pacecars, early fox cobras, glh's & gt350's? I know they are ugly but they cant all be scrapped, can they?
  7. 6

    any tips on mounting a console in 66?

    no holes in floorpan yet. i dont want to booger this up this console is too expensive. im worried about drill bit catching and running the drill into the plastic, scratching it all up putting it in & out, ending up with holes in wrong locations. I was thinking about installing without...
  8. 6

    chasing fuel vapor

    New fuel system front to rear including sending unit, filter, electric pump, reg, holley dual feed all connected with 8an hose and fittings. Bad fumes but no drips, I've checked the fittings with kleenex for seepage. Integral garage and these fumes don't mix well, are the gas analyzers that a...
  9. 6

    what are these wires for?

    The 2 wires going thru the trans tunnel behind the auto floor shifter. doing an aod swap on the 66 and need to hook up the reverse lights/neutral safety, i thought the pigtail for those came out of the firewall though. any clairification would be appreciated.
  10. 6

    aod shift lever orientation

    I plan on using the stock 66 shifter with the AOD. Is the gear selection lever on the trans supposed to point up when doing this conversion? Also what position would park be on that lever, fully rotated clockwise or counterclockwise? I have very limited space with lt headers if the lever needs...
  11. 6

    hood pins location

    would the bracket for the adjustable hood bumpers on the rad support work for installing the pins on a 66 or do i need new holes on top of the support? i will be installing the stainlesss frrp pins with lanyards and a glass hood this weekend. anyone have pics or measurements in from the fender...
  12. 6

    Dealer changes tire and damages wheel

    how would you let them right the nicks and scratches? :bang:
  13. 6

    3/8 fuel senders, where to buy?

    as the title says, looking for a bigger fuel sending unit for a 66. thanks.
  14. 6

    400hp plus rad size in early stang?

    There are quite a few running 351's & 347's with plenty of hp. What rads are you running and does it always mean cutting up the rad support??? 347/vic jrs/aod combo going in this spring. Right now I have an aluminum downflow drop in 16.5 x 16.5 x 2.5 (surface area) rad with a 16in spal...
  15. 6

    what year did they use hardened seates/302 heads

    I would think 74+, anyone know for sure. thanks.
  16. 6

    Magnaflow X-pipe and aod trans in 66 fir or not?

    trying to plan out my exhaust. 289 block/aod, looking at shelling out for the stainless JBA long tubes. Would like the magnaflow exhaust but not sure the "X" will fit. JBA does offer the H pipe in aluminized so if anyone has experience using the JBA products with the aod trans please chime in.
  17. 6

    part number location on 66 oem console?

    where would it be located on the 66 stang plastic console base and would they be molded in the original colors or dyed? thanks.
  18. 6

    tko for 64-66 anyone use this kit?

    Looks like it should be a very complete setup http://www.thedrivenman.com/KE/Ford/Transmissions/index.htm Suggestions regarding long tube headers with this "kit" and clutch setup would be welcome. Ive seen several threads on cable/t5 interference, any workarounds (hyd)? I was thinking of...
  19. 6

    hooker super comp ground clearance

    Would the super comps hang too low for 99% street duty in a 289 66/c4 auto. I am currently weighing the differences between the super comps/comps & headman long tubes to go with my Edelbrock Vr Jr heads. No I will be adding a 7 qt pan as well, probably the milodine that summit carries. Ground...
  20. 6

    What to do for bottom end?

    Im looking for opinions on bottom end. I have the following: Edelbrock Vr jr heads Roller rockers Torker 289 single plane manifold summit flat tappit cam 3400-6800rpm hardened pushrods roller timing set 670 Avenger carb How beefy do I need the bottom end to be? Could I get away...
Top Bottom
Back
Forums
Menu