Search results

  1. P

    parting out '93 331 mustang

    ok so i have an emergency here and need to part out my 93 mustang. i decided to part it out because i wont get my money out of selling the entire car. here are the engine parts: 331 stroker shortblock-has about 500 miles on it. mahle forged flattop pistons, cast crank, balanced, etc. comes...
  2. P

    t/o bearing is chattering with clutch pedal out

    i can lightly pry against the clutch fork and it stops, or put the clutch in and it stops. the car is still in the air after new flywheel and clutch install, is the clutch cable too loose? after i drive it will this go away? thanks :flag:
  3. P

    you get what you pay for...lesson learned

    ok so when i was accumulating parts for my 331 build, i opted for this 28 oz stroker flywheel: ebay item 330399018432 from maddog racing (fastengineparts.com) when i was assembling the engine i noticed the dowel pin holes were too small for the oem pins, so i turned the factory pins down to fit...
  4. P

    estimate my horsepower & torque (I love these threads)

    ok, changing up my combo a little bit, here's the new mod list: 331 stroker engine, 10 to 1 compression gt40x aluminum heads x303 cam ported explorer upper and lower 24 lb injectors aeromotive adj fuel pressure reg 195 walbro fuel pump bbk longtube headers x pipe with flowmasters...
  5. P

    thinking of a head and cam swap.

    ok, heres what i am tossing around in my head; my 67 stang has a 5.0 with gt40x heads and the x303 cam. i'm thinking of swapping them with the gt40 iron heads and stock cobra cam in my 93 lx 331. i would also swap the cobra 1.7's to the 67 and use the stock 1.6's in my stroker. my 67 is...
  6. P

    spec stage 1 or stage 2 clutch?

    i'm ordering my clutch tonight and i cant decide between stage 1 and stage 2. so, with my mods, let me know what you guys think. i will be running a drag radial at the track and street tires on the street. i've had puck style clutches before and i really dont care for the chattering. thanks in...
  7. P

    new wheels just arrived

    my new wheels just arrived and they look great-the pictures at summit kind of suck but these look really good in person and the price was great. anyone else run these? http://www.stangnet.com/mustang-forums/members/project67-albums-stuff-picture4864-picture-037.jpg :flag:
  8. P

    does this pattern look ok?

    its my first time doing a gear swap and i was wondering if this pattern would be ok or not. this is with the factory pinion shim and side shims. thanks for your opinions in advance! :D
  9. P

    will these fit? 295/65r15 bfg drag radials 93 fox

    i've got some 295/65r15 bfg drag radials and i want to know if anyone has run a tire this big on a stockish foxbody. i has eibach lowering springs on rear, fender lip isnt rolled (yet). any help appreciated as i dont know much about foxes. :hail2:
  10. P

    need help with maf selection!!!

    ok i got my 331 stroker alive and running. i need to find a suitable maf for this combo. the car came with a "cobra" maf according to the previous owner. i have no real way of substantiating this. all i do know is the housing measures 70mm but i cant find any numbers on it. the maf sensor and...
  11. P

    lost 5th gear while driving today...

    i was on the fwy and it felt like i put in the clutch. i thought it just popped out of gear but when i tried 5th again, nobody home! i have the t5 on the bench right now and i'm gonna try and see what may happened. any thoughts on this? thanks :shrug:
  12. P

    estimate my horsepower/torque

    what do you guys think this combo is capable of with a good dyno tune? 331 engine 10.2 compression gt40 irons heads, ported and polished. cobra cam 1.7 roller rockers ported/polished explorer upper/lower 70mm t/b and egr spacer 24lb injectors 70mm cobra maf long tube headers 190lph...
  13. P

    will stock valve covers clear cobra 1.7 rockers?

    i'm wondering if anyone has tried the stock cobra crane 1.7 rr's under factory 5.0 aluminum valve covers? i will be running the stock cobra cam as well. thanks
  14. P

    How much lift can stock gt40 heads/springs handle?

    just wondering how much lift before coil bind on stock gt40 valvetrain. thanks
  15. P

    cam suggestions for 331

    help me select a cam for my 331. 10.2 to 1 compression, 93lx mustang 5 speed 3.73 gears, gt40 mildly ported, explorer upper/lower, i want this to be a street driven car that sees the track maybe 15 times a year. i also have to pass ca emissions. i have some crane cobra 1.7 rr's i can use, or i...
  16. P

    help me build my 331 stroker

    i have the chance to buy a 331 stroker kit on the cheap and i want to know what sort of things to expect to replace or upgrade. i had planned on the usual stuff, like oil pump, water pump, hoses, ignition stuff, etc. will i need different injectors? different maf, fuel pump? i already have an...
  17. P

    running rich but getting lean codes. 41 91

    my car runs pig rich but i get codes 41 and 91 showing both o2 sensors are indicating lean a condition. before i replace the sensors, i have longtube bbk headers. i really dont know much about mustangs-most of my experience is lt1/ls1 stuff but i have seen before when aftermarket headers keep...
  18. P

    tuning a demon carb

    anyone have experience tuning a demon carb? im having a problem with the idle circuit being too rich. off idle is ok. please help
  19. P

    tuning a demon carb

    anyone have experience tuning a demon carb? no matter what i do i cant get the idle circuit adjusted-its way too rich. off of idle it runs awesome until the pplugs get loaded up from a couple of warms ups. i dont know very much about carbs but i have the manual and ive tried everything it...
  20. P

    rear end gearing

    hey guys, this is my first thread. i was wondering what rear diff ratio i should get. i have the stock 8 inch open rear, dont know what gear yet. i want a locker and probably 3.55 or 3.80. my trans is '92 t-5. rear tires p295/50r15. thanks.:flag:
Top Bottom
Back
Forums
Menu