Search results

  1. ga289stocker

    Went To The Track W/ 4.10's,j&m Lowers, Drag Struts, New Pb

    Its been a while since I posted on here but wanted to give a quick update. I recently installed some Ford Racing 4.10 gears, J&M lowers and Lakewood Drag struts and hit the track this past Saturday. My previous best w/ the stock 3.27 gears was a 13.54 103.17. I only got to make two passes but...
  2. ga289stocker

    How far can you go once low fuel light comes on?

    Just curious as to how many miles about you can go once the light come on. This is in 03 GT. Thanks..Lovi:nice:ng my new/used Stang
  3. ga289stocker

    I officially HATE the Bullitt Pedals, at least the install part!!!!

    Ok, I've managed to install the dead pedal so far on my newly bought 03 GT. I spent about an hour trying to get the dang brake and clutch pedals coveres on and it seems impossible, i heated them in hot hot water as well, i sprayed lube on them and could not get them on. I'm going to try to get...
  4. ga289stocker

    Anybody know any tricks to pass emissions 03 GT w/ Borla Cat back

    Well just bought the car and it did not pass emissions due to know cats. the guys said he has heard some tricks guys to w/ the o2 sensors or something to get them to pass w/o having to drop the whole system and bolt the factory h pipe and cats back in which looks like a pain, any help is most...
  5. ga289stocker

    1990 Mustang LX Notch for sale

    Here is the craigslist add. 1990 Ford Mustang LX COUPE
  6. ga289stocker

    T5/T45 Pro 5.0 shifter Question???

    I have a T5 Pro 5.0 shifter and want to know if this will fit an 03 Mustang GT which I think has the T45 Trans, thanks...
  7. ga289stocker

    1990 Notch keeps blowing the A/C cooling fan relay moduel under the dash???Help

    Well i got my a/c working for about 2 hrs the other day. Had new lines put in on the high and low sides and new evaporator and system charged. The shop advised the cooling fan relay mounted under the dash on the left side was blown and needed to be replaced and the system would be fine. So off...
  8. ga289stocker

    What size are 4ALD transmission oil pan bolts??

    I'm missing two of these. Also anyone know if the AOD pan bolts are the same size as the 4ALD? Any help is appreicated...
  9. ga289stocker

    Anyone change oil pressure sending unit???

    1990 2.3 coupe: Well appears my oil pressure sending unit is leaking. I'm new to the 2.3 forum but long time Stang.net guy. I'm pretty sure it's the sending unit if it's mounted on the rear of engine up high on the block. Just looks a little different than I'm use to seeing. What is the...
  10. ga289stocker

    How hard/easy is it to change the dimmer switch 90 coupe?

    Appears my dimmer switch is gone. When the headlights are on I have no gauge lights. If i turn the dimmer switch all the way to rt the dome light will come on and then the gauge lights will work. I have it rigged up now and just leave the switch turned all the way to the rt and have pulled the...
  11. ga289stocker

    1990 Notch eletric fan not working??

    Ok car is bone stock 2.3 90" Notch. The stock fan is not working while the engine is running, thus it heats up if stationary for to long. I pulled the electrical connector off the fan and confirmed the fan does work as I straight wired it of the battery to test it. My question is where do I...
  12. ga289stocker

    Stangnet members on "PASS TIME" tonight 9/2 @9 or 9:30pm

    Myself and Vinyl66 got to do the Pass Show in Atlanta back in May. We have been told that it should aire this evening on Speed Channel at either 9 or 9:30 We got picked to do the combo round. If the 1st car up is dark green 69 Slomaro then that's our show...
  13. ga289stocker

    I made it onto "PASS TIME" w/ pics

    Here is a few pics, i'll probably add somemore later. I got to do the combo round w/ one of my buddies that has a 66 coupe, they said they show would aire sometime in Sept/Oct.
  14. ga289stocker

    Anybody watch "Pass Time" on the Speed Channel?

    Well, I got an invite to come out this weekend to the local track where they will be filming 10 shows over 2 days. The invite does not gurantee I will get to make a pass for the show but for them to look at my car and see if they want to use it for show. I'm pretty pumped right now. I think...
  15. ga289stocker

    Mickey Thompson ET Drags 26x8.5x15

    Here is my listing , great deal, **local pick up only** $250 tires only, $300 w/ wheels. 2- Mickey Thompson ET Drags 26x8.5x15 slicks
  16. ga289stocker

    Anyone have pic's of 87-93 Notches w/ 1" or 2" lowering springs installed?

    Please post them pic's, trying to decide how much to lower my 1990 Notch. Seems like i see alot of 2" kits being sold. Thanks
  17. ga289stocker

    What size tires to run on 16" Pony 5 Star wheels?

    I recently got a 1990 Notch from my grandfather w/ some nasty 14" 4cy wheels/tires on it. I scored a nice set of the 16" 5 Star Pony wheels w/ BFG 205/50/16 tires for only $335 of local Craigslist. The tires are a little on the small side but ok for now and like new condition. I'd like to go...
  18. ga289stocker

    New Fox owner: Old Member!!

    Well I haven't been in here much but am hoping to be in the future. I'm finally a fox body owner after years of wanting one. Best part i got it for $0 dollars. Gotta love old Grandad. He gave me his 1990 Notch 4cy/auto this past month. He is 83 and can't drive anymore and the car was...
  19. ga289stocker

    My Stang in Mustang's Unlimited Ads!!!!

    My car has been in the Hemmings Musclecar mag. The last two issues have had my car pictured in the AD for Mustang's Unlimited near the back of the mag. I have a subscription to it and couldn't believe when I saw the Ad. The pic was taken at a Mustang's Unlimited show in Atl about 2 years ago I...
  20. ga289stocker

    New to this part: 2.3 Mustang turbo kits???

    I've been on classic forums for a while but new to this part. Basically looking for some info on 2.3 liter turbo kits available for a 1990 Mustang which I'm getting free from my grandfather and may be a future father/son project. Car has a 4sp auto trans i believe w/ the 2.3 liter for that...
Top Bottom
Back
Forums
Menu