Search results

  1. 4.6andSlicks

    What's the best way to sell my Cobra ?

    Ebay, Autotrader, (are there others). Anything I should look out for?
  2. 4.6andSlicks

    Where can I get coolant bypass O-rings

    I removed the coolant bypass pipe on my 01 Cobra, the one with the bleeder in it and I'm trying to replace the o-ring on either end of it before reinstalling but I can't find them anywhere. I haven't checked the dealer but I can't believe a parts store wouldn't have something like this. I...
  3. 4.6andSlicks

    Does my 2001 engine have the cheap plastic intake?

    2001 Cobra #2199 of 3867 Left Dearborn Assembly Plant 07/19/2001 Is there a way to tell without disassembly?
  4. 4.6andSlicks

    Where can I get coils tested?

    I've been battling a "stumbling" issue at idle to 2k RPM. I replaced plugs and coils (among other things) and still had the issue. I ended up taking it to the mechanic to have it put on the analyzer and, after $460 he tells me the coils aren't strong enough. They're Accel's by the way. What's...
  5. 4.6andSlicks

    Diablo Predator: Can I mod my stock tune

    If I choose to use the stock tune for my 4.6, can I mod it or does it have to have the performance tune installed ? If yes, how's it done?
  6. 4.6andSlicks

    Can I powder coat my valve covers & upper intake?

    01 Cobra 32 valve N/A. Are the valve covers metal? Also, is my upper intake metal or plastic? I'd like to powder coat them the same color.
  7. 4.6andSlicks

    Are all my O2 sensors the same

    I'm troubleshooting an issue and would like to swap my upstream O2 sensors with my downstream. I'm running MIL eliminators and their shut off anyway through my tuner. Any difference in the O2's ??
  8. 4.6andSlicks

    I changed my fuel filter. What a PITA

    What the heck was Ford thinking when they put the fuel filter above the IRS. There's so much ***** in the way, I had to get the hoses off with one hand with gas running down my arm. The next time I pay someone. It took me a freakin' hour with getting the car in the air and all.
  9. 4.6andSlicks

    Is this an IAC leak ?

    I believe I have a vacuum leak somewhere so I took a stethoscope and listened around the gaskets and IAC. There's a button that sticks out the back side of the IAC that definitely is taking in air. Is this the normal air inlet for the IAC? I thought the IAC just bypassed the throttle body...
  10. 4.6andSlicks

    Help, my 4.6 is sick.

    '01 Cobra w/ 50k on the clock. Had it 2 years. All of a sudden it ldles a bit rough and stumbles at cruise speed. Runs great when you stomp on it but when cruising, you can feel it missing a few beats regularly. It's not throwing any codes but here's a clue. When I reset the computer, it...
  11. 4.6andSlicks

    Where did you insert your fuel pressure sending unit?

    I got a new gauge and need to put in the fuel pres. sending unit. Where did you put yours?
  12. 4.6andSlicks

    Can an old battery affect how my car runs?

    My battery is 7 years old, cranking slow and I'm noticing a sputter when not under load. When driving along at an even pace with little load (pulling or pushing) on the engine, I get these random misfires. Changed the plugs from NGK copper to NGK iridium and it seemed to get a slight bit worse.
  13. 4.6andSlicks

    Need gauge sending unit help

    Where do I connect the fuel pressure gauge sending unit and a water temp gauge sending unit? Do I need "T" fittings or something?
  14. 4.6andSlicks

    Do I need a Friction Modifier in my differential

    I want to change the fluid and plan to use Amsoil Severe Gear 75W-90. Do I need to add anything?
  15. 4.6andSlicks

    What do I need to buy..

    ...besides the 4.10s to complete a gear job? I see installation kits of variable sizes. Will the standard do? There's only 48k on my car. I want to use Royal Purple lube. Do I need friction modifier?
  16. 4.6andSlicks

    Unexpected Findings, Steeda Bumpsteer Kit

    Finally got my Steeda Bumpsteer kit installed useing a bumpsteer gauge and to my surprise, found the following: Adding all the spacers above the tie rod end, made the bumpsteer worse than stock. I ended up with: 1ea the smallest space + 1ea the next size up. Everyting else below the tie...
  17. 4.6andSlicks

    My Computerized BumpSteer Gauge (pic)

    Don't know what to do with that old computer? :)
  18. 4.6andSlicks

    I need a pic of your car....

    if it's a 1999 -2004 silver hard top with black GT strips, say 10". I wanna see what my car would look like with them. I have an '01 Cobra.
  19. 4.6andSlicks

    Steeda bumpsteer tie rod end ?

    Does the bumpsteer kit have a dust boot or grease fitting? How do you keep it from filling with sand and wearing out the first year.
  20. 4.6andSlicks

    Need Forum Search Help

    How do I search for a group of words such as Cobra Bumper without getting every post that has either Cobra or Bumper in it ? I've tried "Cobra Bumper" (Cobra Bumper) (Cobra AND Bumper) and every other way I could think of but still get everything with the word Cobra or the word...
Top Bottom
Back
Forums
Menu