Search results

  1. P

    World Windsor Sr Rocker stud height

    I need to know the height of the stock rocker studs on World Windsor Sr. heads. I bought the heads used without studs and need studs with 7/16 threads on the base and 3/8 threads on the nut end so I cant use the stock replacement studs.
  2. P

    Putting in a new motor and have a few questions

    I decided to replace the junk 102k mile 302 in my '92 LX with a 347 shortblock. I have AFR 165 heads and 24lb injectors now. Are the 24's enough for a 347? Ive already got a 255 lph fuel pump in the car. The cam that was in the stock motor was only made for 302-311 ci motors so I need...
  3. P

    clutch safety switch wiring

    Im in the process of collecting all the parts to do a t5 swap on my '92 LX with an AOD. One thing I noticed I dont have is the wiring for the clutch safety switch. I bought a wiring harness that looks like this: and it has the firewall connector plug, speed sensor plug, reverse light plug and...
  4. P

    A few t5 swap questions

    Im going to be swapping a t5 in place of the AOD in my '92 soon and just picked up the tranny today. Heres what Ive got: -t5 tranny -bellhousing -King Cobra clutch and pressure plate -B&M Ripper shifter -aftermarket clutch quadrant -bolts -flywheel -shifter boot -wiring -clutch...
  5. P

    Starter keeps running

    Lately my car's starter keeps running even after the car is started. To stop it from running I need to rev the motor up high and then its fine. It seems to happen more often in cool and/or damp weather. I replaced the starter solenoid on the fender tonight and nothing changed. Whats...
  6. P

    Adirondack Nationals

    Did anybody else go to the Adirondack Nationals car show in Lake George, NY this weekend? I was there all weekend and there were hundreds of Mustangs there and I met quite a few of them.
  7. P

    Just about done

    I worked on the car all day today and its 95% or more done. Im just waiting on 3 moldings I ordered to arrive (back ordered) and then put them on and the body is done. More here: http://www.cardomain.com/ride/2442696/1 I know the G's are missing in the bumpers- I...
  8. P

    Gas gauge not right

    Ive noticed that the gas gauge has been reading more towards full the last few times Ive had the car running (its not driveable yet). One time it ran out of gas and still showed about 3/8 of a tank. It ran out another time too. Today I started it and its showing alot more than the 3 gallons...
  9. P

    Transmission Cooler

    I need a transmission cooler for my '92 LX with an AOD but I dont know which size to get. I looked on Summit's website and they have a few different sizes. The car has AC so theres a condensor in it still. Its got a 2800-3200 stall converter, a shift kit and 4.10 gears. What size is right...
  10. P

    Is this a good torque converter

    I need to put a stall converter in my transmission in my '92 Mustang. Its got a stock AOD right now and Im assuming a lockup converter. I found this converter which is in the range I want (and got a custom ground cam spec'd for)-2800-3200 rpm...
  11. P

    Finally did the 5 lug swap

    I finally finished my 5 lug swap last night. I did the rears using Ranger axles and the front using '94 v6 Mustang spindles. It rolls on '03 v6 Mustang 16" wheels. Unfortunately its still in the bodyshop. More pics here: http://www.cardomain.com/ride/2442696
  12. P

    Do I really need this?

    I had my rearend apart to do a 5 lug axle swap today and I had trouble getting this piece to go back in: I ended up leaving it out. I didnt even see it in the pics of the differential in my Haynes manual where they showed how to take the axles out. It fell out and there seemed to be no way...
  13. P

    Just spent $800

    I just went to the autobody supply store and dropped down $800 on paint, clear and other supplies and materials. My car goes in the shop tomorrow for rust and dent repair and a complete repaint. I also plan on getting the Cobra grille put on and I need to order a hood for it. Im thinking...
  14. P

    Make a Cam Recommendation

    Im doing a bunch of motor work real soon (parts on their way) to my '92 and need to get a good off the shelf cam for it before I put it all together. Here's what I have: -stock 302 block and internals -AFR 165 heads with upgraded springs -Harland Sharp 1.6 roller rockers -Summit roller...
  15. P

    Metal trim around sunroof glass

    Where can I get new metal trim that goes around the sunroof glass? Mine is rusty and pitted and will look like crap on my soon to be repainted car.
  16. P

    Pushrods

    What length pushrods will I need with the following setup? AFR 165 heads: http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&sspagename=ADME%3AL%3AAAQ%3AUS%3A1&viewitem=&item=180088191759 Harland Sharp 1.6 roller rockers...
  17. P

    afr heads

    Ive decided on getting a set of AFR 165's for my '92. Would this be a good set to get? http://cgi.ebay.com/ebaymotors/New-SB-Ford-KC-CNC-Ported-AFR-165-Cylinder-Heads_W0QQitemZ180088191759QQihZ008QQcategoryZ33617QQrdZ1QQssPageNameZWD1VQQcmdZViewItem Also would these be good components...
  18. P

    Good hood

    Im going to be getting my car redone real soon (just got the loan) and need to get a new hood. Ive decided on a Cobra R hood and Im sticking to that idea. I just need to know what brands are good and which arent. I know Cervini's is good but theyre out of the price range I want to stay in...
  19. P

    B cam with AOD

    Would putting a B cam in my '92 5.0 with an AOD be ok? I found one for sale cheap locally and Im not sure if it would work with my stock AOD since most sites that sell it list it as 5 speed only.
  20. P

    Strut tower brace

    How are strut tower braces installed? Im looking at one like this on ebay: Im assuming it bolts on somewhere along the firewall area, but where and how? I dont want to have to take the whole car apart to put one on. Also theres this style: Im assuming this one bolts to the cowl area...
Top Bottom
Back
Forums
Menu