Search results

  1. rednotch

    Wheels-Tires Factory white ponys, anyone know a color match paint for them?

    Just picked up some factory 93 white ponys on the cheap since they had some curb rash and no caps other then three having some deep rash in 1 spot on each rim there very clean, only using them for a roller for now, but looks like they could clean up with some work and sanding and I have plenty...
  2. rednotch

    Staytuned stock bottem end build...

    Yeah don't build stuff like this if you dont know what your doing. Stock bottom end disaster in the making. View: https://www.youtube.com/watch?v=n3BYOCGWBtA&t=551s The summit heads are pretty much base model afr enforcers 8017 springs, 2.02/1.60.., the cam on stock bottom end and just...
  3. rednotch

    Fuel Anyone know a part number for a 3/8" inlet/outlet efi quick connect fuel filter that would fit the stock foxbody location?

    Looking for something easy to source for the fuel system I'm pricing together for the 79. Going to use 6an ptfe kit, A AN efi pick up and and efi pump, then drop the pressure at the regulator. All ready have 6an AN to 3/8" quick connect fittings just need to find a stock efi style filter with...
  4. rednotch

    Any 1 find any decent blackfriday sales for Foxbody or car stuff?

    Didn't see many good sales this year but snagged some junk. Speed master has damn good price cuts up to 60% off for the next cpl days but not many products I have used. Picked up a couple of there header stud extra Clarence kits half off, some basic gaskets, cheap $40 valve covers for the 79...
  5. rednotch

    Drivetrain 8.8 trac lok spider gears..

    Who still make decent spiders gears with all the China knock off and India made stuff out there now? Ford racing Trac lock in the white beater just started groaning on turns, pulled the cover and looks like the spiders have a ton of slop in them, backlash and clutch packs still looking decent...
  6. rednotch

    Fox Is the fox market for average cars crashing in your area?

    Noticed a lot more normal pre covid prices for decent drivers, projects and parts lately, still many sitting over priced though.. Was actually shocked I beat someone parting them out to the 79 coupe I picked up. The guys parting multiple cars in my area still want crazy prices for alot of...
  7. rednotch

    new :poo: box, may need to hit you guys up for 79-82 info when i fix thIs turd.

    New to me :poo:box 79 coupe, has a good T5, running 302 ( not well) and 8.8 swap though it runs and drives like a turd. $2200 drove it home, no real rot I can't fix, I have plenty of parts from previous fox bodies and its about what rollers go for plus has some ok parts so I bought it . Right now...
  8. rednotch

    Engine Cheapy Fox body 7qt oil pans?

    Need to reseal an oil pan and the old custry stock ones looking worse for wear these days, figured might as well throw on a 7qt fox body pan and a new oil pump while I'm at it. anyone used the cheapy china 7qt pans everyone's been selling the last decade, any recommendations on brands like...
  9. rednotch

    Engine 8.2 oil filters whos still making decent ones?

    Fl1a trippled in price and changed for the worse so I switched to wix, seems there making changes to cut cost on their filters too now looking at BITOG site. Anyone used the fl1a alternative from ford they got from champ when m&h couldn't fill back orders in time FL2119B12, haven't seen one...
  10. rednotch

    Shift boot clips, anyone know the size off hand?

    https://www.cjponyparts.com/retaining-clip-set-upper-shifter-boot-to-bezel-1987-1993/p/HW4293/?year=1993&gclid=Cj0KCQjw4NujBhC5ARIsAF4Iv6dVAOoXM6PumOERvegBIBhADEeIAvCj4l8iIWKe7ygfrITDtdz1698aAubTEALw_wcB Anyone happen to know the size of those clips that hold the boot to the bezel off hand...
  11. rednotch

    Anyone tried the daniel carpenter repo speedo cable? E9BZ-9A820? 79-95..

    Bouncing Speedo below 20mph is getting on my nerves in the beater. It needs a cable, Speedos fine when I run it in a drill, gears fresh. I have an old nos ford service cable E9BZ-9A820 but not wasting it on this, its 69" for use with a vss.. Dc has a repo of it for Around $25 listed as 79-95...
  12. rednotch

    Mar hyde satin black making junk look decent again.

    Probably should have snagged some before pics, but I'm lazy, did these quickly in about 45 mins total today. These came off my crusty and rusty $20 auction doors I'm going to gut and try to make useable on a track car. They where sun bleached and pitted badly, still has some scrapes in it...
  13. rednotch

    Is there a semi active thread on repo parts quality?

    Used a lot of repo parts over the years but not all of it, from weather Stripping to trim parts there a lot of overlapping manufacturers and stuff that's rebranded by the big mustang shops. I suck at searching stuff since the last board update so there might be a thread I can't find. One I...
  14. rednotch

    Weather strip by the roll vs precut kits..

    Anyone happen to know the specs of the weather stripping used for the doors and the hatch/ trunk , at this point I'd rather just buy bulk rolls vs the pre cut kits from the mustang shops.
  15. rednotch

    WTB/Trade WTB trick flow street burner/ track heat lower intake

    Looking for a trick flow lower intake for a 302. Street burner, track heat or even an R lower will work.
  16. rednotch

    Who's fixed strut towers on these cars before?

    This just got dropped off today. Will be my third time fixing rotted rails, just normal in the NE these days.... I've used an nos oem full apron before, and I used fox rails oe kit but its designed around early rails and has holes the 87-93 don't and you need to Fab a panel if the rot creeped up...
  17. rednotch

    Deal on Racestars for drag tires cheap 15x8 5 lug

    Check there clearance section...
  18. rednotch

    Bbk header no longer chrome?

    Noticed the old Chome bbk fox body headers are now listed as titanium ceramic coated, anyone bought these recently? Are they just spray bombed in ceramic paint like the old mac headers where or is it a legit coating like the polished ceramic options? never really been a fan of bbk but not many...
  19. rednotch

    pro3i C/C plates and coil overs?

    I am mocking up my front suspension before painting the engine bay... Just have a quick question about the coil overs and the caster camber plates? Do you reuse the factory bump stops and where does the bump stop mount with a coil over kit? is it sandwiched between the top spring cup and the...
  20. rednotch

    HPM trmec crossmember anyone using it?

    I swapped one in my car to eplace my modified stock one that was cracking in the middle from too much abuse. Just swapping the crossmember caused a nasty vibration at 4-5k rpm, anyone else have this problem? I'm thinking it was a pre existing vibration that just amplified since the HPM peice...
Top Bottom
Back
Forums
Menu