Search results

  1. N

    Nitrous cutting in and out

    Okay how often does the nitrous relay go out and is there a reason? My car was cutting out on nitrous only and then I tried everything from plug gap to using the purge solenoid as the main one to see if the other was damaged. Then tonight I bypassed the relay and it ran good on nitrous. This is...
  2. N

    Project Stealth! LoL!

    Before: After: The board is cut out for the bottle and the dufflebag is mounted to the board so it will not uncover while driving. Since my car is a vert you could see the bottle really easy with the top down and if you where looking for it you could see it wit the top up. Also the wires...
  3. N

    Where can I get the tool to take out the ignition switch?

    Where can I get the tool to take out the ignition switch and what size and what is it called. The screw is star shaped but has a pin in the middle , it looks like it is the stock screw. Thanks in advance!
  4. N

    Car is starting weird has a mind of its own.

    Ok, My car devoloped a thing where it would keep trying to start itself until I let out the clutch to kill it. It did it one day then did it a week later. So I replaced the starter solenoid yesterday. The starter is only 2 months old and the battery is about 3 months old. Now I drove the car all...
  5. N

    For those of you that cars run like crap for a min then clear up

    Ok, there have been many, many threads started about every time you start the car it is fine then for about 30-sec to a min it will run like crap and sometimes would back fire into the intake if given too much gas and then clear up and be fine for the rest of the drive until you turn it off and...
  6. N

    Opinons On clutches?

    Ok I have done alot of research and still can not figure out which one I want to go with. Alot of people say centerforce df but I have read that its not good for 400+ rwhp. Also looked at the spec stage 3 but people say its not good for the street and killed there t-5. So my question for you...
  7. N

    can anyone tell me which pin # is missing?

    Trying to figure out which one it was going to.
  8. N

    Is my ecu bad?

    Ok this I just had it dyno tuned and this morning I pulled the codes which were 15 and 85 because I forgot to tell him to delete the cansiter. I was still on 19lb injectors when dynoed but decided to go with the 24's and that is all I replaced after inspecting the ecu witch is missing prong...
  9. N

    Got the Stang dyno tuned last nite and....

    Well, I went and go the stang dyno tuned last night it made 285 rwhp and 325 rwtq on motor and then we shot it with a 150 shot and my clutch gave up. But the first sec of the run it pulled 385 rwhp and 433 rwtq. It shot smoke out of the clutch area and the engine rev really fast so I got to get...
  10. N

    Ruined Trans?

    I was told by the previous owner that it is a world class t-5 all my mods are in my sig plus a 150 shot of nitrous. Now my question is 1-3 gear makes a whinning noise, 3rd gear being the loudest and first and second you have to listen to try to hear it. 4-5 I can hear any whinning at all. Now...
  11. N

    Any 89-92 5.0 stang in Bakersfield, ca

    edited
  12. N

    BAP Sensor Question

    Ok I have been chasing this slight hesitation ever since I bought the car. It does it only once every time the car is started then runs great after the little hesitation. Now everything on the topend it brand new from chasing this but now it has been brought to my attention that we are supposed...
  13. N

    Oxygen sensor question

    I was in the middle of replacing my o2's because they are the factory ones and I figured I should replace them. Anyways I was trying to remove them and couldnt so I broke one so I could get a socket on it and still was not able to remove it. Now with both of them unplugged and the one broken I...
  14. N

    How much power does it take?

    How much power does it take to get a little wheelie with a pretty much stock front suspension? I have it lowered a little with eibach springs. The car on motor has about 300 rwhp and a 150 shot will be going on this week. I have a nx kit so the power is rated at the wheels so I should be between...
  15. N

    I have searched but have q's about pcv

    I have searched a bunch of threads about pcv and how it should be hooked up. I am having an issue where the car will rev slow then at 3500 rpms the power will kick in and it is enough that when is secound gear once it hits the 3500 mark then the tires will start spinning like crazy. I have...
  16. N

    Where do I get the little metal things that hold the headgasket in place?

    There is 2 of them on each side of the block, on the lower end parts. I dont know what they are call but they are like a sleve to hold the headgasket in place while putting the head on. Mine is missing one and I think that might be why the headgasket was leaking when the previous owner installed...
  17. N

    Is it supposed to be like this in the distributor hole?

    I am fixing an oil leak on a car I bought about 1 month ago and while I was doing the bolting down the bolts to 25 ft lbs one of the bolts snapped so I had to pull it back off and while I was doing that I leaned over the distributor hole and seen that the think that the distributor sits on looks...
  18. N

    Need some help

    Ok, I bought the car about 3 weeks ago with the mods in sig. Well, when driving it home I would notice when I got on it, it would go then when it hit 3500 rpms it would really kick in. I thought maybe thats how the cam is, its made for more of top end. Also found out it was only running a 80...
Top Bottom
Back
Forums
Menu