Search results

  1. S

    Tensioner Torque Specs?

    I've just replaced my belt and I'm wondering seeing as my previous belt would chirp upon start up and seemed to wear a little faster then I think it should have I have a feeling my tensioner isn't torques enough or is too tight.Does anyone know the specs on the belt tensioner?
  2. S

    Intercooler Guys,please Help

    Installed a fmic CXracing intercooler(31x12x3) on my supercharged gt my question is tho did you guys have trouble fitting the radiator hose that fits near the supercharger?There's simply not enough room for the bypass valv, the line coming from the discharge,ac lines, some harness as well as the...
  3. S

    Vortech Belt Question

    My belt is going on my Vortech Setup. Going to swapping to a smaller pulley, do I just buy the normal Vortech belt? Will it fit even tho I'll have a smaller pulley?
  4. S

    Pulley Size

    Im currently non-intercooled with a Vortech V2 running 10lbs, im going to install a 31x12x3 Ebay intercooler and I'm wondering what pulley to swap to, I have the stock pulley which is a 3.33? not entirely sure its been so long since my install. How would a 3.25 pulley do? should I be around...
  5. S

    Supercharged Gt Running Lean & Hesitating,help!

    I've got a 2003 mustang gt with a Vortech V2 charger with a svt focus pump,42# injectors,lightning maf,k&n filter,ngk tr6 plugs,4.10 's as well as KB boost a pump. I went to get it tuned at my shop a bit ago and it ran very lean and he couldn't make any power from it because of it,made barely...
  6. S

    Vortech Headunit/Pulley Question

    I recently pieced together a supercharger setup as well as bought a used V2 Headunit from a guy on a mustang classified site. However this is my question, when purchasing a headunit is the 3.60" pulley suppose to be present on the rear of the headunit behind the large bolt? Im asking because I...
  7. S

    Please help Vortech Owners. AC Line MOD

    Im currently installing a V2 supercharger on my 03 GT, however Im very confused on the modification of the AC line that must be done. Also I'm very confused on the "removal of the air conditioning silencer". This is part of the system, so therefore wouldn't it be under high pressure and have...
  8. S

    2JZ Turbo Setup on 4.6?

    I have searched and searched all over the web for anything like this been done but haven't come up with a single thing. My buddies got a 98TT supra that he is swapping his twins for a single T-61 i believe and was throwing around the idea of rigging a system with his old twins for my 4.6. What...
  9. S

    Looking for next mod.Help please?

    I've got an 03 GT auto :(, however i've got 40 Series Flowmasters, Mac o/r H, 4.10's and a tune. What is your guys' input on my next mod? Im only going to have ~$500. Was thinking of grabbing a TB & Plenum and a cheap CAI. What do you guys think I should spend it on?Thanks
  10. S

    O2 Too short with new mid pipe

    Has anyone had any problems with the drivers side front o2 sensor being too short? I read that this was only a problem for the 04's, but I have an 03 and figured it would be alright. Mine is only short by about a 1/2 an inch, and have tighten the pipe as much as possible to get rid of any slack...
  11. S

    Mid pipe install.....seriously wtf

    Okay just recently bought a Mac H pipe for 03 GT.ok am i just an idiot or am i doing something wrong? everyone else I have read on did not have much trouble getting the passenger side bolts from the manifold. I spent pretty much the whole night getting 2 bolts, the rest were a breeze but just...
  12. S

    Mid pipe & MIL eliminator question

    I have just a quick question. I am going to pick up a MAC o/r and was wondering how many of the mil eliminators will i need? my buddies got 1, and if i remeber correctly on his car, which isnt a stang he only needed 2. should mine be the same?
  13. S

    Gears & Speed Calib Question

    I am awaiting my tax return and will finally be able to spend a bit of $$ on my ride. Going to grab me a a 4.10 kit. My question is since i already have a SCT 4 Bank chip can I just have this sent back and retuned for my gears to solve the speedo problem with gears? or do I need to buy a speed...
  14. S

    P0340 Code & Question

    So a few weeks ago randomly i popped the P0340 code for Camshaft Position Sensor and read up on it and ruled out that replacing the alternator turns out to solve the problem and not the sensor. So I am just wondering am I possibly risking anything driving it for a little while until I get the $$...
  15. S

    Quick Mid Pipe question

    I am looking to upgrade my stock midpipes to most likely some MAC's because ive been told they go well with my super 40's. Which ones will fit the stock system? the long tube H pipes or the Short, i was thinking it would just be the Long tube since I have stock headers, is this right? and anyone...
  16. S

    Gears & T-lock Question

    Hi new to this forum and just got a quick question. I currently got a 03 gt and havent been able to do much to it at all because of money but im finally getting some and are looking into getting gears. I was looking at the 4.10 gears at AM.com but i was just reading on that you have to buy a...
Top Bottom
Back
Forums
Menu