Search results

  1. R

    351? or 302

    i just bought a 84 mustang. the guy told me it had a 1969 302 in it. i pulled the valve covers and it has 351 heads (351 stamped with WF ). now i am wondering if it is 351 heads on a 302 block or a complete 351. how can i tell. thanks
  2. R

    Nitrous

    well i want to get in the 12's so i was thinking of the zex Dry nitrous kit. is there anything else i have to get. i have 24.pound injectors 190lph fuel pump. just put a old edelbrock RPM intake on. will i need a chip ? msd box? or can i just hook it up and go.? any info will help my...
  3. R

    control arms

    I just picked these TRZ rear lower control arms . He said it should fit 79-04. well I didnt realize they dont have the brackets on the bottom for the sway bar. Has anyone ever heard of this brand, or seen this style? any info will help. thank you
  4. R

    edlebrock rpm intake question

    i just picked up an older performer RPM intake. i did not come with ANY hardware. ive been searching everywhere for an install kit and came up with nothing. does anyone know where i can find one. or let me know what fittings i need for the vacume lines
  5. R

    edelbrock vs cobra

    i have a 95 cobra intake now. do you think going to a rpm 2 will be a noticable diff. or is it not worth it?
  6. R

    ticking

    when my car warms up i get a ticking sound off and on at idle or lower rpms. not at high. it sounds like is coming from the thermostat area. would a bad thermostat make this noise??
  7. R

    Anyone have an egr tube f/s

    i need a egr tube for my 95 mustang gt anyone have one they want to sell.
  8. R

    fuel pressure

    i just added 24lb injectors with the calibrated 75 maf a 70mm tb eddy heads long tubes o/r pipe. and i already had a 190 fuelpump. what is a good pressure to set the fuel at . and do you think my headers are glowing becasue of the fuel being to lean or rich???
  9. R

    idleing high

    just got my car running i did a new 75 maf 70 tb long tubes o/r mid pipe edelbrock heads and i set my timing to 12*. the car is idleing at 1800rpm. what could it be????
  10. R

    timing 180 out

    just went to start my car after doing head and long tube sawp. when i tried to start it it made a LOUDDD back fire. the timing was 180 out. do you think i casued any internal damage or any damage at all???? thank you
  11. R

    egr delete

    i have a 95gt and i need a intake spacer to clear my valve covers. i was thinking about just deleting the egr. i already got the smog delete. will no egr effect anything . i also plan on getting dyno tune in a couple weeks.
  12. R

    alternator hitting valve cover

    i got canton aluminum valve covers for my 95 gt and now the alternator is hitting the valve cover. what can i do???????? thanks
  13. R

    cobra intake eddy heads

    just istalled edelbrock 60379 heads on my 95 gt and when i put my cobra lower intake on there is a gap between the block and intake. did i mess something up or do i need an edelbrock intake????
  14. R

    bbk long tubes

    i Just got bbk long tubes with the short o/r mid pipe for my 95 gt and there are no hangers on the mid pipe. do you need hangers or will it be ok with out them? Thank you
  15. R

    Head and intake gaskets

    Just got a edlebrock performer 6037 heads. i have a cobra lower intake. and shorty headers. what gaskets should i use for heads intake and exhaust ports. thanks
  16. R

    Engine lift points

    I am changing the oil pan on my 95 GT and the lifting hooks that come on the stock exhaust manifold bolts are gone. . where else can i lift the motor from with out messing with the old rusty manifold bolts. Thanks.
  17. R

    long tube

    wich is the best long tubes for my 95 . and wich fits the best and easier to install.
  18. R

    Heads rr pr

    i want to change my heads. i was looking at edelbrock performer. should i go 1.6 or 1.7 rr's and what size push rods are the factory ones. and is there anything elses i should change or need to know. i already got e303 and gt40 upper and lower intake
Top Bottom
Back
Forums
Menu