Search results

  1. O

    Pinging w/90 Lx coupe

    Hey guys need a little assistance. I have a 90 LX coupe, that is pinging. It doesn't matter what RPM, what gear, what load either a little or WOT. Warm or cold. Mods are full exhaust, 65mm exploder t/b, BBK short ram intake, with K&N. New cap, new rotor, new plugs, new wires. TPS is .98v, new...
  2. O

    Jacobs Ultra Coil

    Anyone ever used one on their fox? I came across a ultra coil, and wondered how well it would work, and when you did use the coil, what did you gap your plugs at? I've heard .10 over stock, due to the increased spark from the ultra coil. Here's what I got: Thanks I appreciate it guys.
  3. O

    Fox/Sn95/MISC

    Parts are off a 90 Mustang LX 5.0 Fox Radiator Fan with new fan clutch -$40 (1 month old) SOLD Bullit Shift knob $20 4 lug axle shafts $10 a pair 4 lug drums $10 1996 SN95 Front spindles w/dust shields 2 96 front rotor's not warped plenty of life...
  4. O

    Taurus Electric Fan Install on a Fox COMPLETED

    Ok so after reading a RETARDED amount of threads all over the interwebs, I figured I'd tackle this mod. Installation of a Early 90's model 2 speed Taurus electric fan on my 90 Notchback. Parts: Taurus Fan: Hayden Fan Controller: 75 Amp Relay : 40 Amp female fuse...
  5. O

    Taurus EFAN controller?

    ok so here's the scenario. Got a 90 Fox. Just finished the 3g 130 Amp alternator, install. Now I picked up a Taurus electric fan complete with the pigtail. I know there is a retarded amount of threads out there for a Taurus install on a fox, but it seems there are some major differences...
  6. O

    Foxbody Parts

    Alright guys got some stuff to clean out: OPEN TO TRADES...lemme know what you have! Parts are off a 90 Mustang LX 5.0 (4) 4 lug axle shafts ($20 a pair) (2) 4 lug drums ($10) (2) 1996 SN95 Mustang Spindles with dust shields ($75) This includes right and left spindles...
  7. O

    Hoosier Drag Radials

    I have a set of 335/35/17 hoosier slicks. These are well used, but have a few passes left in them. I picked them because they were advertised as 315's. Well I picked them up, got them home and realized they looked alot bigger than 315's. Looked at the sidewall and sure enough 335's. There is no...
  8. O

    WTT Hoosier Slicks :)

    I have a set of 335/35/17 hoosier slicks. These are well used, but have a few passes left in them. I picked them because they were advertised as 315's. Well I picked them up, got them home and realized they looked alot bigger than 315's. Looked at the sidewall and sure enough 335's. There is no...
  9. O

    WTT Hoosier Slicks :)

    I have a set of 335/35/17 hoosier slicks. These are well used, but have a few passes left in them. I picked them because they were advertised as 315's. Well I picked them up, got them home and realized they looked alot bigger than 315's. Looked at the sidewall and sure enough 335's. There is no...
  10. O

    WTT Hoosier Slicks :)

    I have a set of 335/35/17 hoosier drag radials. These are well used, but have a few passes left in them. I picked them because they were advertised as 315's. Well I picked them up, got them home and realized they looked alot bigger than 315's. Looked at the sidewall and sure enough 335's. There...
  11. O

    Cabela's Car meet TONIGHT

    Cabela's has a car get together every Sat night. All makes and models. Usually a pretty good turn out. I've been there and had 100+ cars show up. Bring your chairs. Saturday, April 16th @ 7:00 p.m Address is: 419 Old San Antonio Rd Buda, TX 78610 or just to say that it's in the...
  12. O

    SN95 and Fox Parts

    Alright guys got some stuff to clean out: OPEN TO TRADES...lemme know what you have! Parts are off a 90 Mustang LX 5.0 (4) 4 lug axle shafts ($20 a pair) (2) 4 lug drums ($10) Reason for sale is I did a 5 lug swap on my 90 coupe. (2) 1996 SN95 Mustang Spindles with dust shields...
  13. O

    96 Spindles and 4 lug parts

    Alright guys got some stuff to clean out: Parts are off a 90 Mustang LX 5.0 (4) 4 lug axle shafts ($20 a pair) (2) 4 lug drums ($10) Reason for sale is I did a 5 lug swap on my 90 coupe. (2) 1996 SN95 Mustang Spindles with dust shields ($75) This includes right and left spindles. PENDING...
  14. O

    96 spindles on a fox?

    ok I've read every 96 spindle thread that I could find.... but didn't see anyone mention this. I know that there is 8mm difference in track width, when installing 96 spindles PER SIDE. I know that the 94-95 spindles have an upwards curve on the steering arm. I know that a bumpsteer kit will not...
  15. O

    More get up and Go

    Well I picked up an 8.8 for the mustang. Got it from a buddy of mine for FREE. This free stuff is working out GREAT! The notch has 2.73's in it right now, which is great for mileage. I just got 23.95 going from My house up to Ft Worth and back. Which is pretty good. But unfortunatley, it's...
  16. O

    New coupe pictures

    Got a couple of pics I took tonight of the couple, I thought I'd share. After this weekends car show, I've decided I'm going to paint the coupe Sonic blue. I've got new stainless steel 2.5 LX tail pipes to go on, but I'm waiting on summit racing to send me my stainless couplers. On to the Pics:
  17. O

    BUDA Car show, Mustang crew

    Well ran down to BUDA tonight for a get together. Turned out pretty cool. Cars were in and out, so I didn't get a whole lot of pictures, but ones that were worth it Didn't have any idiots running around, trying to do burnouts which was awesome! Here's pics my wife took: My notchback...
  18. O

    Texas FNG

    I'm new to the site, and thought I would post up some pics of my new car. This replaced my 99 Ranger 4x4 that was just about as far as I could get it.I could not put my two little girls in the ranger. Car seats do not fit on the jump seats, nor would I ever attempt to put them in the jump...
Top Bottom
Back
Forums
Menu