Search results

  1. 1bad67sbf

    Fuel Pressure Sender Unit?

    I want to wire up a relay to kill my fuel pump once a set psi is reached. is the oem system just on a timer or does it pick up fuel psi then shut down? thanks
  2. 1bad67sbf

    Engine Will The 174 Blower Fit?

    i have a 92 with a cowl 3in hood and need to know if im going to have to cut the hood to fit this supercharger. ( ) 174 PRO-STREET SUPERCHARGER KIT I dont think the carb hight will be the issue but the nose of the supercharger may conflict with hood. thanks john
  3. 1bad67sbf

    Need a little help with some vacuum issues

    im fighting poor idle and my vacuum wont hold steady. i have been hunting and found an intake leak and fixed it, that helped but still not right. my issues now are it runs better when i un-plug the fuel regulator and plug the vac line. is this a sign of it leaking at the gasket/o-ring or of it...
  4. 1bad67sbf

    WOW, found this and had to share!!

    :nonono: "Modified" Ford Mustang GT
  5. 1bad67sbf

    What should the fuel PSI be with a stock regulator?

    my 92 is running super rich and I put a gauge on the fuel rail and im getting 44psi @ idle and 39 during a quick rev to 4k. is this to high?
  6. 1bad67sbf

    Need some help with a posi !!

    im still working on getting some issues fixed with my car but in some "testing" lol, i had some one tire fire going on. it would start with posi but when i grab the brake it would slip to one. here is the issue, do i rebuild or replace? i have to go into it to do the five lug swap that i...
  7. 1bad67sbf

    Need some help getting the "kinks" out

    I have a few "kinks" to work out and instead of making 10 different threads I thought I will try to feed off this one to get help. first thing, I need to get my gauges working. my charging, fuel, and tach work but no oil pressure, temp, or dash lights. what do the one's not working share...
  8. 1bad67sbf

    hard starting/wont start when hot

    i got my car running for the first time from a roller but i think i have a vac leak due to very crapy power brakes/ poor idle but when i cut it off after 15+ min it wont restart. i moved the distributor around while cranking with no luck. i have a timing light but it seems not to work so i will...
  9. 1bad67sbf

    Need some help with an intake I saw

    i was at the all for show in PA and seen this car and fell in love with the intake setup. i have a performer 5.0 intake now, so would this setup be an upgrade in performance or just looks. does anyone know the price range or part number for this lower intake and elbow? i feel it just makes...
  10. 1bad67sbf

    need some help with the fuel pump power feed

    i have no power to the fuel pump and from what i have read the fuse under the dash and the relay next to the mass air is the place to start. all fuses are good but i only have one relay next to the mass air. i think its the WOT ac relay not the fuel pump because it does not have a pink/black...
  11. 1bad67sbf

    is four year old gas to old?

    im getting close to starting my project but it has a half a tank of gas in it from 07. should it be ok or do i need to drop the tank and dump it out?:shrug:
  12. 1bad67sbf

    need some wiring help please

    i just hooked the battery up for the first time after a nearly ground up build and my door alert comes on when you open the door without the key in the ignition. it will also let me hit the horn. (my daughter found that and scared the hell out of my wife.lol) it's also making a beeping sound...
  13. 1bad67sbf

    How to extend the O2 harness for long tubes?

    i need to extend the harness to work with my BBK long tubes and want to know if cutting and splicing in some new wire is a bad idea or ok? thanks
  14. 1bad67sbf

    quick coil help please

    i am putting a 92 "roller" back together and need to know if the coil needs what i want to call a Condenser but it may have another "correct" name. it is the round cylinder that mounts with the coil. i see the 94-95 uses one and the van i got my motor from (88) uses one but does a 88-93 fox need...
  15. 1bad67sbf

    need some belt help

    i have stock pulleys and no ac (frpp delete) or smog. i came up with needing a 73in belt but carquest got me a "73.0" belt but it was to short. i want to know what belt part number people run with my set up. thanks
  16. 1bad67sbf

    my project car had a 23 tooth speedo gear?.?

    its a 1992 gt and i thought it had a stock 3.08 rear gear from rolling the wheel 1 turn and counting the driveshaft but it has the 23 tooth speed gear in it i thought it should be an 18 tooth gear for that ratio. i know almost nothing about the history of this car or its mods other than a...
  17. 1bad67sbf

    can someone post some pics from under the hood

    im putting a car together i did not take apart and i need some close pics from under the hood to see where things are mounted and if im missing anything. please try to take a few, some of the firewall area to see vac hose routings and one from the coil/start solinoid area. thanks for any help:pics:
  18. 1bad67sbf

    need some quick help please

    im swaping oil pans on an engine to put into my 92 and i thought the crank had a small amount of play before a piston started moving and i thought it was just due to TDC of the cylinder but i pulled the rod end off and it has light groves worn into it.they dont look to bad but i can feel them...
  19. 1bad67sbf

    how much cam can stock valve springs handle

    i got this cam https://www.lunatipower.com/Product.aspx?id=2513&gid=309 •Advertised Duration (Intake/Exhaust) 270/280 •Duration @.050" (Intake/Exhaust) 204/214 •Gross Valve Lift (Intake/Exhaust) .448"/.472" •Lobe Seperation 112 •Intake Center Line 107 •RPM Range 1200-5200 i want to know...
  20. 1bad67sbf

    A9L with a non-HO engine

    from what i found the a9l is a HO firing order and i have a flat tappet non-HO engine and im thinking about changing to a roller cam to get the right firing order. will this kit + a roller cam and lifters get me going so i can run efi?
Top Bottom
Back
Forums
Menu