Search results

  1. JasinC19

    Fuel 1993 - Need size of nylon OEM fuel lines please

    Hey guys, this is for my 93 GT 5spd. What size(s) are the nylon lines connecting the hard fuel lines running up the car to the hard lines going to the fuel rail? Are they both 5/16? It sure seems like it from my measurements... The fittings are different sizes, but the nylon lines seem the...
  2. JasinC19

    Electrical Air Bag Code 34 - So Close...

    I've been struggling with air bag code 34. I have followed the service manual procedure here: http://ww2.justanswer.com/uploads/AP/apjp02/2012-09-09_031945_code_34.pdf Assuming a good air bag module, the possible culprits are - short between circuit 614 and 615 - bad clock spring - bad air...
  3. JasinC19

    Electrical Car Dies When I Move Eec

    1993 Mustang GT 5 speed, a3m eec I have my EEC sitting on the passenger floor mat to diagnose this issue. When I move the EEC, especially go to turn it upside down, the car begins to die. I quickly flip it back right side up and it smooths out. When the car sputters, it throws code 66 and...
  4. JasinC19

    SOLD Bbk Catless H-pipe For Fox Mustang - $125

    Location: Norfolk, Va I am selling 1986-93 FORD MUSTANG 5.0 BBK OFF ROAD H-PIPE FOR SHORTY HEADERS - 2.5" - FOX BODY. Test fitted to car, but never fully installed. Had to go with catted pipes. Included is what you see in picture...
  5. JasinC19

    Expired 19lb Mustang 5.0 Fox Body Fuel Injectors - Never Used!

    Location: Norfolk, VA Paid 180 to Precision Auto Injectors - never used - upgraded fuel system before I installed them. They were professionally rebuild injectors - still in packaging from Precision Auto Injectors. Looking for $100
  6. JasinC19

    SOLD Bbk Fuel Rail

    City: Norfolk, VA Test fitted on rebuilt engine, but would not clear my new intake manifold. Comes with all hardware as seen in picture. http://www.latemodelrestoration.com/item/BBK-5010/86-93-Mustang-50L-BBK-High-FLow-Aluminum-Fuel-Rails $160 obo
  7. JasinC19

    Im Gasket Wet With Gas

    Started car for enough time to move it into driveway. Pulled upper intake. Reeked of gas. Gasket was moist with fuel. How rich should this puppy be at first start up? Wet rich? Lol. 24lb injectors with custom tune and pro m maf calibrated. Mpg is prerty horrible...
  8. JasinC19

    Is Anyone Running A Stack Racing Tb?

    Has anyone had any experience with an SR (Stack Racing) throttle body from American Muscle? Not sure who makes them, but I was thinking of replacing my BBK with one. They are on sale right now. http://www.americanmuscle.com/sr-75mm-tb-8693.html
  9. JasinC19

    Ford Racing Shorty Header Gaskets Same As Oe?

    Will typical Fel-Pro OE style header gaskets fit Ford Racing shorty headers or do I need to order the gaskets sepcifically for the FRPP headers? Thanks, Jason
  10. JasinC19

    Engine Mechanic Says Sticking Valve Guides

    As some of you know, I've been struggling with a really bad idle issue after installing my TFS top end kit. A local mechanic with experience in the performance fox body game diagnosed it with sticking valve seal guides. He said that sometimes in new heads, the valves heat up in such a way where...
  11. JasinC19

    Hydraulic Lifter Question

    Engine has been sitting for a week or two. When doing a valve adjustment, I noticed some lifters are completely solid and others move a few millimeters. (But that is all, maybe 4mm). I removed the "squishy" lifters, submerged them in oil and pumped them up and down, but they never get rock...
  12. JasinC19

    '93 Mustang Air Bag Question

    Hey guys, I am trying to diagnose a code 13 (crash sensor circuit shorted to ground) in my air bag system on my '93. I have reached a point where I am completely stumped. Following the FSM test procedure, I replaced the air bag/clockspring with an air bag simulator. Found here...
  13. JasinC19

    Finding Where The Short Is (93 Mustang)

    I'm following the test procedure for my air bag system. I made it to where I am supposed to test the B Pillar safing crash sensor. The sensor checked out ok, so the procedure is saying that there must be a short in circuit 623 which is a purple wire with a white stripe. It run from the B...
  14. JasinC19

    What Air Bag Simulator For A '93 Mustang Gt?

    I am having a hard time finding an air bag simulator for my '93 mustang. There are a bunch on ebay, but I think the 93's were different and I don't want to buy something incorrect. Thanks, Jason
  15. JasinC19

    Location Of B-pillar Air Bag Safing Sensor Connector

    I'm looking for the location of the connector for the air bag crash sensor in the B-pillar. FSM says left kick panel, but I'm not seeing it. It looks like a white cylindrical plug. From the dash, is it up or down? Thanks Jason
  16. JasinC19

    How To Test Clockspring?

    I am attempting to diagnose my air bag trouble code 13. I have the clockspring out of the car at the moment and was wondering how to test it. I know other vehicles you can test for continuity. The FSM does not have a procedure that I could find. Thanks, Jason
  17. JasinC19

    How To Test A Clockspring

    Service manual doesn't really have a procedure other than "Are wires broken?" I saw a generic video that says to check for continuity between the two leads on the upper connector. Is this true?
  18. JasinC19

    Leakdown Test - Catastrophic Failure?!?

    I have an old Matco leak down tester. I tested cylinders 5-8 at TDC compression stroke. Unhooked from cylinder: 30psi into tool (left gauge) ~29psi right gauge (hey it's old) Hooked up to cylinder: right gauge was reading between 20-22psi, which if I understand correctly is 33% loss...
  19. JasinC19

    Video: Please Help Diagnose My Vacuum Gauge Reading

    '93 GT Built, assembled by yours truly Symptom - runs rough, bad shaking at idle Please watch the video below. The needle on the gauge is violently shaking back and forth. I think it's supposed to be steady. I ran a cold compression check a few minutes ago. All cylinders were between 150...
  20. JasinC19

    Air Bag Computer Fried Itself?

    I had an air bag code 13. I pulled the air bag fuse to diagnose and put it back in the wrong slot. This caused code 12 to appear. By the time I figured out what had happened, the car had been started a few times. When I replaced the fuse I got good ol code 51, which is internal fuse blown...
Top Bottom
Back
Forums
Menu