Search results

  1. fastimes69

    Need help truobleshooting!!

    i am trying to figure out a dead cylinder problem.The car is a 93 coupe with gt40 heads,intake,e-cam,24lb injectors,1.7,s,( bolt ons),etc,etc,.The car is running on 7 cylinders.We did a compression test,all cylinders are at 120 +-,checked injectors pulses with noid light,new...
  2. fastimes69

    Need wiring diagram

    My cousin just put together an 89 Hatchback 4 Cyl and converted to a V8 using the parts and wiring harness from a 90 model.The alternator wont charge and the headlights,parking lights won't come on either.We noticed the 2 plugs by the brake booster are different.Does anyone have a diagram that...
  3. fastimes69

    Vortech Q's

    I was wondering if anyone could help.My good buddy has a 94 Cobra with a pullied S-Trim on it.He is currently building a 347 stroker and is switching over to Nitrous.He is selling me the Vortech for $1,500 which is a deal since the blower has not been driven more than 1,000 miles.The car has...
  4. fastimes69

    GT-40 Head users come on in...

    I recently got some cast iron GT40's off a 94 Cobra with 31,000 original miles.I will be putting these on a rebuilt block with bolt ons.GT40 intake,E-cam,pullies, exhaust,65mm TB,etc,etc.My question is it possible to run 12's with these heads unported and with bolt ons.This set up is going in a...
  5. fastimes69

    Help, 94 Cobra problems

    Hey guy's, my buddies got a 94 Cobra with some mods. S-trim,30 lb inj,MSD 6al,BTM,255lph pump,all the exhaust is BBK,75mm mass air, 70mm throttle body,etc..The car was running fine until a week ago. It starts up fine,then after about 10 seconds the idle drops, it backfires, sputters.It feels...
  6. fastimes69

    Question on valve size on GT40 heads?

    A buddy of mine is considering buying some GT40 cast iron heads (not p's) for cheap,that are ported and polished and have been upgraded to 2.02/1.60 valves. My question is will these heads have piston to valve clearance issues with this size of valves.These will be going on a 94 Cobra and I...
  7. fastimes69

    which wire for air fuel gauge??

    I'm putting an air fuel ratio gauge on a 94 Cobra and want to know if anyone knows which wire (color) to tap into on the oxygen sensor. Thanks..
  8. fastimes69

    which wire for air fuel gauge??

    I'm putting an air fuel ratio gauge on a 94 Cobra and want to know if anyone knows which wire (color) to tap into on the oxygen sensor.
  9. fastimes69

    Please help with main harness wiring issue!!

    I'm working on a buddies car, it's an 88 gt. He bought a Ford Racing main wiring harness and computer from 5.0 Resto to be able to use mass air. I hooked up the harness and all but there is a couple of problems. The car has two connectors in the engine by the EEC test pin, a gray and black. The...
  10. fastimes69

    PROBLEMS after cam swap, please help!!!

    My cousin had an E -cam on his 89 coupe and the car ran and idled fine. The engine is stock except for the pullies and exhaust. He decided to buy an f -cam and swapped it in. Ever since the cam change, it won't idle steadily, then it dies. It runs rich because the plugs are all black when we...
  11. fastimes69

    Need help with Vortech S-trim.

    So we installed an S trim on my buddies 94 Cobra. The car cruises and idles fine but when you floor it, it does not pull. It feels like its holding back. We put on a boost gauge and it shows between 7-9 lbs under load. Has anyone ever had this problem before. Any troubleshooting tips. Does...
  12. fastimes69

    Who did you buy your Lincoln Mark8 fan from???

    I'm interested in purchasing a Mark 8 fan. I've seen several people selling these fans on E-Bay, but I would like to know if there is a seller that some one knows about or has bought from on E-bay. Is there anyone reputable and honest on E-bay :shrug: that is selling these fans. Let me...
  13. fastimes69

    Installed an S-trim on a 94 Cobra and have some questions...

    I just installed an S-Trim on my buddy's 94 Cobra.I need to know how to bend the A/C line that is near the supercharger and the radiator hose.The instructions show like a 90 degree bend, but that's easier said than done.I f any of you installed an MSD 6al with the BTM, where did you guys mount...
  14. fastimes69

    A couple of nitrous questions?

    I'm running an NOS (05115-2) stage 2 kit on my coupe and am currently running a 175 shot.What all is needed to upgrade this kit to a big shot or to run like a 200 or 250 shot.Has anyone ever upgraded this particular kit? My cousin just got a Nitrous Express wet kit that's adjustable from 35 to...
  15. fastimes69

    Electrical guru's please help me with charging system problems!!!!

    Ok, I'm having some trouble with my charging system. I have a 130 amp alternator on my car. I checked the alternator, and battery at the local Autozone and they are both ok. The alternator was bench tested and works good. Still the car wont charge. I did a search and got some wiring diagrams as...
  16. fastimes69

    fuel pump won't come on.

    I just finished converting my 4 cylinder coupe to a v-8 from my 91 lx. The coupe I bought is a 93 and I used a wiring harness from a 1992 gt. The only problem is the fuel pump won't come on and there is no power to the pump but the relay has power.I ran power directly to the pump and the car...
  17. fastimes69

    Wiring harness

    I recently purchaseda 93 coupe and want to transfer everything from my car to the coupe. Does anyone know if the wiring harness on my 91lx fit the coupe without replacing the wiring from the dash? Is there a website that shows the differences in the harnesses? Ive heard the 90-91 harness will...
  18. fastimes69

    anyone know how to fix toe in!

    Does anyone here know how to fix what's called toe- in. The top of the front passenger tire sits like its sunken in and causes my tire to wear from the inside. I've replaced the ball joint, tie rods, rack and pinion, springs,struts, and still the tire sits the same. Could it be a bent control...
  19. fastimes69

    How to fix drivers seat?

    The back part of the seat in my car is broken. When you sit down, it leans on one side only. I've seen several mustangs with seats broken this way I guess from hefty guys leaning on them. Is there a way to fix this or is it better to replace the seats! I would prefer to fix it for now!!!
  20. fastimes69

    wow, snapped an axle

    Hey guys its been a while since I've been on here, lots has changed!! Anyway, on March 5th I went to my local track to run my car. I recently installed a ported and polished edelbrock performer rpm intake and BBK long tubes with shortie h-pipe. I was trying out a 175 shot of nitrous for the...
Top Bottom
Back
Forums
Menu