Search results

  1. OutLawSE

    GAS MPG ?? Acetone

    Guys, Does adding acetone to gas really help increase MPG. I drive 42 mile round trip to work each day and gas is killing me. Also, does it help lower emissions? Thanks
  2. OutLawSE

    Thinking of buying a 2001 GT, few ??

    Guys, I have been out of the Mustang world for a few years. I have owned 2 Mustangs in the past, both 94/95 with 5.0s. So the 4.6 is a new topic for me. I am thinking of looking for a 2001-2003 GT with an auto. (I need an auto for the wife) How does the 4.6 PI respond to basic...
  3. OutLawSE

    Saying Good Bye ...

    Guys, I just wanted to say thanks for all the help over the past 4 years. I would have never been able to build my 2 mustangs without the information I gained here. I know this isn't tech but I posted here cause I know most viewers, like myself, never read the Lougne area. They skip...
  4. OutLawSE

    Need some encouragement..

    Guys, I need some encouragement to finish my stang. She is almost done and I just have a few issues left with the car: - A leaky AODE. New B&M pan, but still leaking a pint every 2 weeks. - Noisy driver side rocker. - And I think I need new rear shocks. She is riding rough and...
  5. OutLawSE

    AODE 4x4 Filter ????

    Guys, My new deep B&M pan is calling for a 4x4 Filter. What vehicle did this filter come in ???? AODE 4x4 Truck, Explorer???
  6. OutLawSE

    TCI Deep AODE pan ???? anyone?

    Hi, I just bought a TCI deep finnned alum. AODE tranny pan. Hopefully this will fix my leaks. Does anyone has any experience with the TCI deep pan? Is it good quality? Any issues? Thanks.... John
  7. OutLawSE

    Is retarding the stock cam a waste of time?

    Guys, I currently have the motor apart and just re-installed the stock cam. (Due to many issues with the AODE/idle/driveability) Now, the cam is installed straight up. Would it be worth anything to retard the cam 4 degrees? Would it make that big of a difference?
  8. OutLawSE

    AODE still leaking. I am out of ideas. Help!

    Guys, My AODE still is leaking. Passenger side rear. I have tried everything. I replaced the pan and rubber gasket. I had come to the conclusion that the old pan was warped, or so I thought. Well a new Ford pan and rubber gasket and still leaking. The mating surfaces were clean, bolts...
  9. OutLawSE

    Aode Stock Pan, How much fluid?

    Guys, I need to know how much transmission fluid the stock AODE pan holds? 4 quarts? Thanks......
  10. OutLawSE

    E-Cam, Low Vacum, Horrible Brakes = HELP

    Guys, I have a E303 cam in my AODE car. The car had no brake problems before I installed the new motor. Now, when just backing the car up while idling, the brake goes almost completely to the floor before I feel the brakes catching. I tested it and the vac = 8-10lbs at a 900rpm idle...
  11. OutLawSE

    Any tips for a idle/surge on SN95 with cam & AODE

    Guys, On my 306, I have already bumped the idle to 950 via a chip. I have opened the idle screw alittle. & I have no vacum leaks. She still surges at idle and whenever I put the car into drive from park, she still wants to stall? If there a feature in the EEC that pulls timing whenever you...
  12. OutLawSE

    Trickflow Head Users, I need your HELP!!

    Guys, Yesterday I broke a valve spring on my Twisted Wedge heads. Cylinder #1 Intake spring. Is there anyone who has upgraded their TW springs to the TrackHeat springs that would be willing to sell me a couple of their stock .540 lift Trickflow valve springs. I will pay for overnight...
  13. OutLawSE

    Trickflow Head Users, I need your HELP!!

    Guys, Yesterday I broke a valve spring on my Twisted Wedge heads. Cylinder #1 Intake spring. Is there anyone who has upgraded their TW springs to the TrackHeat springs that would be willing to sell me a couple of their stock .540 lift Trickflow valve springs. I will pay for overnight...
  14. OutLawSE

    Where to buy a cam pin?

    Guys, I just bought a new Ford E-303 cam off the interent. However, it didn't come with a cam pin. The pin used to set the timing on the chain. Can I buy this pin at a regular auto store or do I have to goto Ford?
  15. OutLawSE

    Anyone runnning a E-cam with milled heads?

    Guys, I would like to run a E-cam with 1.6 rockers on my new set-up. I am limited on what I can run due to my TFS Heads being milled .050. I am not so worried about the lift but the duration. I would really like the TFS Stage 1 cam but the 221/225 duration is too much. Please post...
  16. OutLawSE

    Fly-Cutting Pistons....

    Guys, My TFS Heads are milled .050. I would like to run the Crower 511 cam with 1.7s : .498/.515 Lift , 218/224 Duration. Does anyone have any info on flycutting pistons? Is it easy to do and how do you go about cutting them. The pistons are hyper. Thanks....
  17. OutLawSE

    Custom Burnt Diablo Chip... Need Help.

    Guys, I am going to order a custom burnt Diablo Chip for my 95 on Mon. Its gonna be burnt for my mods and its gonna eliminate the shift retard between shifts, fix my hanging RPMs between shifts and I also want if to turn on my fan sooner. I have a 180 thermostat. What temp should I set the...
Top Bottom
Back
Forums
Menu