Search results

  1. mustangcobra93

    Explorer intake vs cobra intake

    I have a 1993 cobra with the stock intake. My lower intake cracked and it seems it will be just as cheap to pick up another one than have the current one fixed. I have a guy that is wanting to sell me an explorer lower that has EGR. He also says he will go ahead and tap the hole for the ACT...
  2. mustangcobra93

    datalogging w/ the interceptor

    I am running an Interceptor I. I hooked up my map sensor with the GM supplied harness last night. Tonight I am going to use a vacuum pump to test and make sure it is working (see if it is pulling timing). However, last night I hooked up the laptop to see what would happen when I would try to...
  3. mustangcobra93

    those running an interceptor II

    could you take a pic of your map sensor harness for me focusing on the wires coming off of it and going into the crane box. you can send them to [email protected]
  4. mustangcobra93

    wiring question

    Tonight I tucked the interceptor away in the kick panel and made a little headway in starting on the harness install so I can take advantage of the boost tables. Pic one shows my new GM harness which fits my map sensor perfectly. Pic 2 shows the harness on the interceptor I need to connect the...
  5. mustangcobra93

    which rev limiter to use?

    I have a crane HI-6S on my car as well as a crane interceptor. Which should I use for my rev limiter, the HI-6S or the interceptor? It seems to me the HI-6S would be the better choice since it takes out spark where as the interceptor takes out fuel, like the PMS and taking out fuel at say 6300...
  6. mustangcobra93

    vortech guys

    how can i install the supercharger without having to use my smog pump? I've had my smog pump off for awhile now, but the instructions show using it.
  7. mustangcobra93

    homemade powerpipe

    I am getting ready to install a a-trim vortech kit on a '93 cobra. I didn't want to but a powerpipe cause they are so dang expensive. I thought one could be rigged up pretty cheap. Let me know what you all have done and what you used and where you bought supplies to make one compatible with my...
  8. mustangcobra93

    cam swap help

    car is a 1993 cobra I will probably do a cam swap soon and wanted to let you guys review my list to make sure the part numbers are right and that I have everything I need. oil & filter -- motorcraft 10w30 & FL-1A cam -- Crane Powermax 2031 gaskets -- 720-4410K (jeg's mr gasket cam...
  9. mustangcobra93

    tokico hp vs lakewood 50/50

    Is there a major difference between the lakewood 50/50 rear shock and the tokico HP "blue" rear shock? I am currently running the tokico's on the rear and stock front struts. I have an opportunity to buy some 90/10 struts for the front and I'd rather have all the same brand. Should I just...
  10. mustangcobra93

    1993 Cobra A9L Swap

    I am currently running a 100 shot on my car (1993 Cobra). I got to talking to some buddies last night and they told me to swap a A9L for my current stock computer. Is this a good idea? Also, is it an easy swap as in unplug the stock one and plug in the new one or is other stuff required?
  11. mustangcobra93

    wiring help

    I don't know much at all about the electrical system of our cars. Then when adding the zex kit, heater, purge, HI-6S, & shift light I don't really know what wires to splice for the 12 v power that is hot only when the key is on and during cranking. Right now its all (except for the purge which...
  12. mustangcobra93

    Walbro in tank 255 lph part number?

    The part number I want is: Walbro GSS340 correct?
  13. mustangcobra93

    fuel pump size

    I plan on adding a Zex kit to my car in the next couple months. I wanted to upgrade the fuel pump, but wasn't sure which one I should go with. I figured if I was doing it, might as well go ahead and put a 255 lph back there. Is that ok or will it cause problems. I have 24 lb injectors.
  14. mustangcobra93

    alignment?

    Ordered some Tokico HP "blue" shocks tonight. I was going to go with bilstein, but I read several reviews on stangnet and the corral and all were good. Plus, since I don't plan on lowering my car I think they should work fine. I really like the price too $44.44 each which means I got two cheaper...
  15. mustangcobra93

    Shocks

    I was wanting to add new shocks and struts to my car. I was probably going to to with Tokico HP Blues. I was wondering if it is ok to add shocks, but not replace the front stock struts right now. I don't have the $ to do struts and shocks, but do have the $ for shocks. So, is it ok to do...
  16. mustangcobra93

    10 hole rim size

    Size: P235 / 60 R15 Rim: 6-9'' Tread: 8.0'' Section: 9.5'' Diameter: 26.1'' what is the rim size of 10 holes?
  17. mustangcobra93

    which tires will fit?

    I have a 1993 cobra. I was given a set of 10 holes (15 inchers). I would like to mount either a set of slicks or drag radials on them for the track. What sizes will fit will no issues on my car?
  18. mustangcobra93

    fan clutch -- which one?

    I was going to upgrade my fan clutch with the "police" fan clutch. PPI sells it for $99. However, I came across www.50resto.com version and its only $65. Anyone running the 50resto version? Which one would you all buy?
  19. mustangcobra93

    police fan clutch

    Where can I buy this?
  20. mustangcobra93

    Pinion Woes

    I'm in the process of changing gears from the stock 3.08 to 3.55. I've got the differential out and am currently trying to get the pinion off. I took the pinion nut off and the flange. The instructions I have say that the pinion should fall loose with those removed. However, my pinion didn't...
Top Bottom
Back
Forums
Menu