Search results

  1. 3

    seatbelt chime...where to disconnect it?

    I have a 2000 mustang. Where can I disconnect that annoying seatbelt chime that keeps going off until you put your seatbelt on? Yes, I know it's law to have one on but regardless, I would like to know how to disconnect it. Would there be a harness under the driver seat or something? I could...
  2. 3

    Overdrive bypass switch no working

    On my '00 V-6 mustang, the previous owner installed an aftermarket shifter handle, which meant he had to mount the o/d switch to a different spot using a toggle switch. My problem is that I just noticed that this switch he rewired does not work. It does not lockout the overdrive, nor does the...
  3. 3

    Frustrating problem when getting gas...

    Recently bought a 2000 mustang(V-6) but everytime I go to put gas in the tank, the fuel nozzle handle keeps clicking(as if the tank is full). I have to let the fuel trickle into the tank and even then the fuel nozzle wants to "click" off. It takes 5-10 min. to put $20 worth of gas in. I've tried...
  4. 3

    what would you say this is worth?

    1988 mustang GT, 5 speed (all stock) with 130k miles. Here is what's wrong with it: wrecked front end (needs both fenders, hood, whole front nose clip) frame is not bent or rusted. Second gear syncro needs replaced No heater and fuel gauge does not work Interior is fair condition Tires...
  5. 3

    halo headlight replacement

    Just bought a 2000 mustang that already had aftermarket halo headlights installed but just noticed one side is out already. I never had these type of headlights before so I need to know what is involved in changing them or what type of bulb I need.
  6. 3

    Dead spot in steering wheel...

    just bought a 2000 mustang V-6 auto. I noticed tonight that the steering as a small "dead spot" in it. It has a small amount of play in the steering wheel as you drive down the road. It's not a lot but it's noticable. What would cause that? It has 18inch wheels and tires but I don't think...
  7. 3

    Looking at a 2000 mustang tomorrow(need opinions)

    Going to look at a 2000 mustang V-6, automatic tomorrow. It has a Mac cat-back exhaust and a Winstar intake. I have a few questions that I hope somebody can answer. First, how reliable are the Ford V-6 engines and 4 speed autos? It has 117k miles. Second, is the Winstar intake upgrade...
  8. 3

    brake line rusted fast to brake cylinder!

    My buddy and I went to replace both my rear brake cylinder on my '88GT but could not get the brake line off because it was rusted fast! It was soaked wit PB blaster the night before and we spayed more on today but to no avail. What's my options? Cut the line and replace the section of line that...
  9. 3

    Holley carburetor issue

    I helped my friend install a new power valve in his 650 holley. We scraped all the old gaskets off the surfaces, installed the new valve and put it back together. When we started it up, fuel was spraying from the vent tube. It wasn't pouring out but you could see a light mist of fuel coming out...
  10. 3

    Anyone running Comp 284S cam

    Anyone here running Com Cams 284s solid flat tappet cam? I was considering swapping out my 274XE cam for it possibly or something similiar. This brings me to my next question: What would I need to do my '74 heads(rail rockers) in order to make it an adjustable valvetrain? I think somone...
  11. 3

    Are '74 351w heads "rail rocker" heads?

    What kind of heads are the '74 351w heads? Are they the rail type or pedestal mount?
  12. 3

    What to do over winter?

    Now that racing is over for winter, I'm thinking what I should do over the winter for next year. I would REALLY like another set of heads but I don't see that happening. Here's what I'm thinking: Buy a new solid lifter cam to better match my converter OR sell my NOS sniper system(new in...
  13. 3

    fuel gauge show full all the time

    My fuel gauge, in my '88GT, is always pinned past the full mark regardless of amount of fuel in the tank. Is that a faulty sending unit in the tank or something behind the instrument cluster. Also, when the tank is full or almost full, I head a banging in the tank when making turns. Did...
  14. 3

    removing headlights from 87-93 mustangs

    Anyone know how the headlighs are removed from an 87-93 mustang?
  15. 3

    converting to 4 corner idle...worth it?

    I'm considering converting my Holley to 4 corner idle. Is it worth it? I can have it done for $55
  16. 3

    Condensation in headlight lens

    Is there a way to remove condensation from behind the headlight lens in the 87-93 mustangs? My driver side lens has water behind the lens, which effects how well it works. There's a small hole on top where water seeps in. Is the lens a sealed unit or is there a way to remove them and get the...
  17. 3

    stock '88GT exhaust question

    Is there a gasket on at the factory collector where the "headers" and H pipe join? I have a small exhaust leak there, which results in a tapping sound. I crawled under and it is leaking there just a little bit. Can that be fixed by just tightening the collector bolts or is there a gasket...
  18. 3

    How much HP by going with a manual rack worth

    How much HP or E.T can be gained by switching to a manual rack? Some say none because they claim the PS pump doesn't use any engine power until the wheels are being turned. It must be worth something because most serious drag racers go with a manual rack.
  19. 3

    Cleaning IAB

    How do you go about cleaning the IAB? I'm having cold start problems on my '88GT. First time I start it everyday, I have to stab the throttle to keep it running and then it idles on it's own again. How do you go about doing that?
  20. 3

    Opening rear hatch without key

    Is there anyway to open the hatch from the inside if the key is lost? I don't want to call a locksmith?
Top Bottom
Back
Forums
Menu