Search results

  1. JETHRO

    FOUR WHEEL DISC PROPORTIONING VALVE

    did a five lug swap last winter and did four whell disc with cobra brakes. i omitted the stock proportioning valve and replaced it with a wilwood deal for the back. i teed the front and the lines went straight to the wheels from the master cylinder. i used a 95 master cylinder. should i have...
  2. JETHRO

    393 STROKER KIT. WHAT TO LOOK FOR

    guy with a corvette just moved in down the street and there already another vette down a little farther. so ive decided that im going to get a 393 rotating assembly for my 351w roller block. anybody got one off ebay from the mustang depot? is a cast steel crank good enough? what kind of #'s do...
  3. JETHRO

    rearends (mixing and matching)

    wasnt sure where to post this one because it covers alot of years. does anyone know if a 90 fox 8.8 will bolt up to a 2000 that has a 7.5. i know you have to swap the axles but i wanted to make sure i wasnt missing anything else. are driveshafts different,are the housings the same width and the...
  4. JETHRO

    Booster For 4 Wheel Disc

    i just did the 5 lug and cobra brake swap on my 89. i was wondering if brake boosters from 94 and 95's will bolt in. and if one from a 98 will bolt in because the local junk yard has one. car stops good but it just seems like its missing something.
  5. JETHRO

    66 convertible,value

    i have a friend that has a 66 k code convertible. its a little rough. needs paint and motor. has new top. i think it may be a 4 spd car. i havent seen it up close. just pics. shes wanting to sell it but didnt know how much she could get for it. any ideas? roughly
  6. JETHRO

    HORN BUTTON

    where can i get a new horn button for an 89. mine went south and was stuck on. i looked like a drill sergeant field stripping a 45 when i had to get it to stop in the middle of traffic. i checked the resto places but i didnt know if anyone knew where i could get a new one.
  7. JETHRO

    good heads or not?

    just picked a motor from a van. its a 5.4 and the van was a 99. the date on the valve pan is 6-15-99. are these pi heads? im use to the pushrod motors so im not sure about these. thanx
  8. JETHRO

    fluid capacity of t-5

    can someone tell me how much fluid a t-5 holds? 89. couldnt find anything in the search.
  9. JETHRO

    351 MEXICAN BLOCK IN MASS.

    ill make someone a good deal on a 351 mexican block thats already in seekonk mass. its already bored .030(might need .010 more). some deadbeat had me ship it there cause he wanted to buy it. well he didnt pick it up. its been there a week and estes is gonna have to store before long they said...
  10. JETHRO

    93 351 Rods

    im gonna be building a 393 and was wondering fow good stock 93 windsor rods are. they came out of a truck motor. im probably gonna be shootin for around 500hp at the flywheel. i might also be using a 351 mexican block thats early 70's. wondering if anyoone knew what kind of advantages ill have...
  11. JETHRO

    carberated setups(pics)

    carberated setups (hp and torque #s) im gettin really anxious and was wondering what everyones setup is as far as carbs go. im gonna be doing a 351. if anyone wants to include pics that would be great. ill just be doing the stock stroke and maybe getting the block bored. aluminum heads and the...
  12. JETHRO

    Got A Car Now I Need Ideas

    just bought an 88 coupe. im going carb with probably 17" wheels. i want it to be fast an the street around corners and the strip. i wanna do a stroked 351. this is going to be a budget car though and i thought about just doing a plain 351 with aluminum heads a good cam intake and carb. what are...
  13. JETHRO

    is it worth 1400

    we all know how coupes are getting hard to find. atleast for me anyway. found one that the guy wants 1400 for and it used to be a four cylinder. it now has an 86 ho motor with a carb and an aod in it now. i dont care about the motor. i want to go with a stroked windsor any way but still carb. i...
Top Bottom
Back
Forums
Menu