Search results

  1. R

    Valve spring gurus.

    I've got a set of both gt40 and gt40p's sitting in my garage. My question is regarding to valve springs and or adjusting/shimming them to my .444 HO cam in my 1994 Gt, I want to stick with this cam for turbo or blower in the future. I'm using different springs than the hyped up trickflows pn/...
  2. R

    Fuel pump questions

    I tested fuel pump pressure on the car today (94 GT 5.0) and am getting zero (0) pressure even tho the pump can be heard priming in the back, getting 12 volts at the 20amp fuse under the hood. The fuel shrader valve barely puddles. My rpm needle jumps slightly when i crank the motor, there is...
  3. R

    Compression test. How bad is it?

    I've completed 3 compression test on my 90k mile engine. I wanted to find out where my motor was for future upgrades,but i am so unsure of my numbers. Dry test numbers arent exactly matching to each other. Wet test looks better than both dry test. Cyl- 1st dry/ 2nd dry/ 3rd wet (oil) 1-115. /...
  4. R

    Engine 1994- (compression test)

    I've completed 3 compression test on my 90k mile engine. I wanted to find out where my motor was for future upgrades,but i am so unsure of my numbers. Dry test the numbers arent exactly matching. Wet test looks better than both dry test. Cyl- 1st dry/ 2nd dry/ 3rd wet (oil) 1-115. /...
  5. R

    Broke The Tube To Egr, What To Do.

    So I was removing my upper part of my intake manifold to put in a brass fitting http://s155.photobucket.com/user/car_sand/media/Mobile Uploads/20160802_133014_zpsfond0cdp.jpg.html?sort=3&o=2 something I should of done years ago when I installed the manifold? Well, tried to remove the egr...
  6. R

    Trans Swap Complete, Driven And Know I Got A Few Questions

    Completed the swap about a week ago, this is my first manual car that I've driven and can now drive the car pretty smoothly, but my brother did notice that the clutch pedal is stiff as heck, I got behind the wheel of his civic and mx3 and clutch pedals on those are a lot softer than mines. Is...
  7. R

    Drivetrain Flexplate bolts work with a t5 flywheel?

    Im going to pull the Aod-e out today, Just wodering if I can use my old flexplate bolts on the flywheel for the t5 swap, I can't seem to find the answer looking through some of the old posts. And this time around I was able to find the correct pedals and T4M0 computer. Thanks guys.
  8. R

    Driveshaft yoke which one?

    Im looking to complete the part's list for a t-5 swap, I leaning forward to gettting an autozone fly wheel ($50), last but not least the yoke that connects to the driveshaft, what years and models are standard on the t-5's for our sn-95's?
  9. R

    Manual Transmission Harness. W/pics

    Well my Aod-e is taking a nose dive for the worst. Searching through the yards I found a 94 GT manual ECU, Pedal assembly, trans harness. My question? is if this harness is usable? My confussion, is when I compare to the ebay pics, I haven't stripped all of the black plastic shield off. But...
  10. R

    Is this normal backlash on rear wheels

    I just finished doing a Differential trak lok install. I reused my old S spring because the new one that was supplied is impossible to install, heck I even had problems reinstalling the old one. I checked backlash on the big gear once I installed everything except the diff cover, I used a...
  11. R

    Problem with my differential ?

    Got a problem with the Stang. I've taken my car tp two mechanics. The mechanic I took the car into recentlly, told me; my clutches in the axles/ differential where going out, he was putting in new breaks on the rear, and noticed the passenger wheel would'nt spin freely like the driver wheel...
  12. R

    T-5 swap. What year of parts can I use.

    I wan't to do a T-5 swap for my car. I can't find a 1994-1995 manual gt, but there are 1996-1999 v6's. I was thinking ow swapping whatever parts I can, and then later ordering the transmission from pro-motion, or prestige. Any of the electrical connections the same, Fork, fly whee, clutch...
  13. R

    Differential bearings

    Here's the story. Whenever I raise the gar up on jack stands, and put the trans in "Drive, reverse, 1, second" and lightlly step on the gas I get a wooshing sound from under the car. Now when I get the car in the street, and drive it a little, no noise can be heard. Are the differential...
  14. R

    engine to transmission plate is it important ?

    Gotta question is this plate really important, it goes between the flexplateto and the engine (where the trans is) I bolted up the trans already and found out I forgot to put this in there :doh: :bang: . say I instal some washers with the same width equal to the plate, will it work ...
  15. R

    people who have installed a Torque converter, need some help.

    Ok guys im having a problem. My torque converter won't seat all the way in, feeling around with my fingers for clearance I can confirm there is about 1 inch After maybe a little under an hour, of turning while pushing, it won't go further than those 2 inchest, leaving an inch of space...
  16. R

    Aod-e transmission drain plug kit, anyone ever install one ?

    Has anyone ever installed a Drain Plug kit on they're stock Aode transmission pan ? I've called autozone to check availability, the autozone representative adviced me not to install one, for reason that the transmission pan metal might be too thin, and oil will go through. Instalation...
  17. R

    flex plate bolt questions... thread sealant on the bolts or not.

    Im doing my rear main seal again this time with a Felpro teflon seal. I've heard that the bolts that attach the flex plate to the engine need to be sealed, but I wasn't sure. If they do need to be sealed what type of sealant should I use silicone, etc?
  18. R

    trans pan bolt thread repair? what size helicoil?

    Anyone know the size helicoil kit one should be looking for, to fix the pan bolts on the transmission. I can't remember if it's a 8mm x 1.25 or 6mm x 1.25. Thanks.
  19. R

    IT'S ALIVE... car is running: Torque converter - transgo kit installed

    I finally found out why my car was not starting, it seem's I under estimated how much fuel I had in the tank. Well, I just started the car again (with fuel) and took her out for a drive around the block, and it is scarry. Scarry in the sence that I hit the gas, the wheels spun and I started...
  20. R

    torque converter/transgo kit installed... having problems now.

    I've recentlly installed the new torque converter and transgo shift kit. now im having a problem. I've started the car for the first time, I went through all the gears, before butting it into drive, the installation seemed to worked. Then I stepped on the throttle; I hear a backfiring noise...
Top Bottom
Back
Forums
Menu