Search results

  1. 6

    I need help on a 9in seal?

    I have a 9in but dont know the year. My housing is leaking by where you put the axle in. I pulled the seal and dont have a part number. The part stores cant find it either. Which I think is b.s So anything at this point in time will help. Thanks
  2. 6

    Need help finding a part number on a 9inch

    My 9inch is leaking out the side of the tube. I pulled the seal but cant read a number on it. The guys at the parts store are not good. I have 28 spline shafts if that helps. Thanks
  3. 6

    C4 external band adjustment?

    Can you guys tell me how to do this and where its at. Thank you.
  4. 6

    Need help with C4 not wanting to shift into 3rd?

    I dont have a clue what this is at all. It was doing good first and second gear shift just fine but cant get third. I try to feather it in and some times it will go. Now when I fight to get it in third it runs and then down shifts its self in second. Anything help woud be good. Its a...
  5. 6

    T-45 0R T-5

    My buddy found a 95 with a 4.6 and a 5spd how do I tell if it is a T-5 or T-45? I told him I wanted the trans for my stang. Thanks
  6. 6

    anyone running a tunnel Ram on the street.

    I just got a tunnel Ram and I dont know what size carbs to run on the street. Any help will work at this point. My motor is a 90 302 block with the heads ported out and 1.7 crane rollers. I turned my pistons around to bump it up some. My cam is a Voodoo .227/.233 dur and the lift is .522/.538.:D
  7. 6

    need pics of cars with cages. Backseat area?

    I just put a cage in the car and now I have no backseat. I need some Ideas on what to do to the back to fill up the open space.
  8. 6

    shift light ?

    I was just wondering how to get the light to come on when you start the car up. I like lights switches and gauges its all cool stuff to me.:nonono: I got a msd box everything works great with it just want to find out how to get this to work.
  9. 6

    good 1/8 mile gear combos

    What is a good gear to run in the 1/8 mile with a TCI C4.
  10. 6

    GT40P Heads how much hp from them.

    I found a set of GT40 heads in the mustang mag the othere day. The company is Tri-state they want $598 for a pair that come with springs good up to a .550 lift which is good for my cam. Just built a 302 and it needs a set of heads to work right on it. The car only loves 93 and I have a bet with...
  11. 6

    starter and flexplate grind.

    I just built a 302 up and i had to get a .50 flexplate for the 302. My problem is that on my 289 the flexplates teeth is 157 and the one for the 302 is the same? why did it work for the 289 and give my 302 problems now. On the first start up.
  12. 6

    289 heads

    These worth porting and putting bigger valves in. What cc are they.
  13. 6

    6pt roll cage in 65 done but need help?

    I put the cage in the car over a year ago and just got side tracked and have not done anything to it at all:nonono: . I am just about done building the new 302 for it and that should put about 400hp give or take few. I just need to come up with some ideas for the inside of the car. I need some...
  14. 6

    battery keeps dieing Dont know why.

    I turn off all my switches fan,lights,fuel pump, radio, nothing else is on. I left to go out of town for a week and came back and it was dead. I killed my red top I charged it and put it back in there. I can drive the car around for 15-20mins shut it off and try to start it and it acts like it...
  15. 6

    need help what cam should I go with?

    First off I want a rough killer sounding cam that can put the power down too. I was thinking of a crane that is .234/234 lift .512/512 and lunati the same way or a Edelbrock cam that is .224/.234 lift .496/.520 . Iam wanting to go with the Edelbrock one. :shrug: My heads are going to be a set...
  16. 6

    anyone have a pic of a 65 or 66 with a roll cage?

    I want to see what one looks like before I put one in my car. I was thinking of a 6pt I dont want a full cage it is still going to be a street car I hope.:shrug:
  17. 6

    How streetable are tunnel rams. HAHA

    I am buying this motor off a buddy of mine who built it for his 68 fairlane that ran 7.80's in the 1/8. I think with my car being lighter it should hit 7.50's. I wanna drive it on the street bad just to show off the tunnel Ram:D. His mustang has about the same setup and gets 4 miles to the...
  18. 6

    engine swap and get the damn thing to start on a dime.

    engine swap and cant get the damn thing to start on a dime. I pulled the engine out of the mustang and put it in my truck. The damn thing has trouble starting every time I have to move the dist. to get it to run. IT is starting to smoke from the cables on both sides. Do I have a bad ground I...
  19. 6

    How hard is it to tune a 650dp?

    I just bought one for $50 bucks how hard are these to tune. What size jets should I run up front and back.
  20. 6

    headlights go off and on?

    I need help with this can you guys point me in the right spot to start on this problem. I dont have a clue where to look first. Thats why I cant go the track tonight and run.
Top Bottom
Back
Forums
Menu