Search results

  1. S

    A/C Unusual problem need help!

    OK so started about a month and a half ago. A/C blows ice cold. It has had the same charge of Ra-134 for one or two previous summers and ran flawlessly. The problem is that it will run fine then all of a sudden the compressor will just click off. It doesn't come on and off like if it were low on...
  2. S

    Vortech V-2 3.33 pulley belt slip

    I did a search and couldn't quite find the answer I was looking for. I'm seeing noticable belt slip, and can also feel the boost cut in and out when hammering it. I had an oil leak that got onto the belt. Still have the vortech supplied belt on there, had a advanced auto belt on there for 24...
  3. S

    A few Pics, just to tease...

    Havn't posted any pics recently so here is the update. Vortech SQ h.o. kit installed and running with vortech tune. Raced a 05 GT with Saleel blower putting down 460ish to the wheels. From 30 to 120 he pulled one car on me. Car is pretty quick. Hope to have the car fully detailed in the...
  4. S

    Car is ripped apart...

    For a couple Minor upgrades...:D
  5. S

    Nasty Driving!

    YouTube - Episode 203: Ok, Ok... Ken Block Gymkhana Dude is serious.:jaw:
  6. S

    ATTN: 00-04 Vortech Owners!

    I bought a 00-04 vortech sq kit. It is brand new, but did not buy from authorized dealer. It is the high output kit with the aftercooler and is suppose to run at 9-10 ibs. Question is did your kit come with a MAF? I looked all through mine and can't find one. I have the fuel pump, and...
  7. S

    OMG you won't believe this!

    It's my birthday bitches!:spot::jester::rock:
  8. S

    LOOK WHAT I GOT!

    I just had to tip the hat sidewayz for this one! Brandnew Vortech SQ aftercooled kit!
  9. S

    Post your badass burnout!

    Here is mine!
  10. S

    Problems with predator Factory tune

    I've had this issue on two cars, one being my own, and the other an 01 Bullit with a seperate predator. When trying to put the factory HP tune on the car, it will not adjust the gear ratio to 3.73. It acts fine when you select the ratio, you flash the car, but it tunes for a 3.27 gear...
  11. S

    IS my axle houseing bent?

    Ok so I've had problems with the rear since I bought the car 60K miles ago. This last time I have 31spline mosers, with a FRPP Carrier, just freshened with bearings, seals, and installed to spec. I launched the car on 315 M/T DR's at 3K last weekend. Come to find out I twisted/bent an axle, a...
  12. S

    Possible Defective axle?

    So I have 31 spline Moser axles installed. I went to the track on a set of 315 MT streets. After my first pass coming down the return road I noticed the car bucking at low speeds and low load, and a noise from the rear.(couldn't figure out at first if it was tire or bearing noise) The track...
  13. S

    Creeking noise is steering.

    At a dead stop or parking lot speeds every time I turn the wheel I get a loud creeking noise from the right front of the car. I can turn it any amount either direction and every time it makes this noise. I'm thinking either the rack or ball joints. Anybody have similar problems?
  14. S

    Track Day in Maryland!

    Hey guys April 19th and 27th will be an unofficial Stang track day. A bunch of us are getting together to cruise to and either watch or participate in test n tune in the Maryland area. One day we will be going to Mason/Dixon raceway and the other we will be going to Capitol raceway. Let me...
  15. S

    Torque Boxes

    SO how many of you guys with power adders that run sticky tires have your boxes done up? And if you do did you just weld them or did you reinforce with plates? I'm really concerned about mine because supposedly previous owner ripped them out and they look like they were just spot welded back...
  16. S

    Knight Rider TONIGHT!

    NBC @ 9, 2 hour event. Watch it!
  17. S

    Who has leak free headers here?

    I got my 02 GT with a set of JBA shorties already on the car. They cracked so I replaced them with a set of FRPP coated shorties. Had a guy install the first time with the frpp gaskets. With in a week they were leaking. Few months later I did the job myself. Dropped the K member, installed...
  18. S

    HELP! Reverse Idler in TR3650

    Originally I took my trans out to replace a 4th gear synchro assemble due to a grind under hard shifting. I ended up replaceing 1-2 synchro 3-4 synchro, and 3 and 4 sychro rings. When reinstalled the trans had a binding feeling when rolling to a stop in neutral, could hear in the rear of the...
  19. S

    GT vs. Mach 1 fuel pump?

    Ok, as some might know I'm putting a 125 shot on the car. Question, are the GT and Mach1 fuel pumps the same pump? If not does the Mach 1 flow more, and can it support a 125 shot? I ask because I have this pump laying around and if I can save a little that would help.
  20. S

    Opinions on Centerforce Duel Friction?

    Ok, I had a Compation clutch stage II in the car. Pressure plate decided to take a sh1t on me. The car runs high 12''s low 13's already and I'm planning on putting a 125 shot on the car by spring. FROM EXPEIRENCE ONLY! What are the opinions out there on this clutch? I've heard that stock...
Top Bottom
Back
Forums
Menu