Search results

  1. G

    Problem with plenum spacer

    I just installed a 1/2 inch plenum spacer and now my EGR line running from the headr to the EGR valve it too short and ideas here guys, your help is appreciated. Thanks in advance
  2. G

    More ?s on P.M.S

    Ok first I don't know what a "load" is. I know there is LL ML 2345345.....but I have no idea what this means nor any idea what the timing should be at these points. What is the timing stock when the base is at 10 and how much does it get boosted at each rpm. Plus do i want more timing in the...
  3. G

    Just installed P.M.S!!

    Just installed PMS however I just want to mess with the idle. Is there way just to do that. Basically for now I just want my car stock settings but I want to be able to mess with the idle and tps and stuff. Is that possible? Also, can I control when the fan turns on to make the engine run...
  4. G

    Problem with NOS kit

    My buddy has a 94 cobra and when you spray the nitrous the motor bogs down. Any ideas????
  5. G

    94SC50

    I was wondering how much if you could make me one of those holders for the P.M.S
  6. G

    Need opinions on buying a cobra

    My buddy is looking to buy a 97 cobra from a dealer that has 91000 on it for 10,000. We got them down to 8500. However, we heard a little wining noise from the trans so they jacked it up for us and it is a tremec. So now the car has a tremec and bassani exhaust, but for some reason there was...
  7. G

    Just ordered P.M.S today!

    I just ordered the P.M.S and just wanted to know some success stories some of you guys might of had with it. Plus any tips on the do's and don'ts please feel free to voice your opinion. Thanks. 1995 Mustang GT Convert. -Ford Motor sports 4.10 rearend gear -BBK shorty equal length...
  8. G

    Flow chart for a 75mm GMS mass air

    Does anyone know where I can get the flow chart for a 75mm GMS mass air calibrated for 30lbs injectors? By the way anyone know where I can get the flow rate for ford racing 30lbs injectors?
  9. G

    Biggest rim and tire combo

    I was wondering what is the biggest rim and tire combo I can go with the quad shocks still on and how big can i go if the quad shocks are off. I am looking to go with a M/T on a 15 or 16 inch rim.
  10. G

    Questions for Custom Tuning

    I am finally getting my car tuned on wednesday so I wanted to know if there is anything i should be telling the guy or any advice anyone can give me would be most appreciative. 1995 Mustang GT Convert. -Ford Motor sports 4.10 rearend gear -BBK shorty equal length headers -bassani...
  11. G

    Hanging Idle

    First I dont' know why you can't adjust the TPS I hooked up a voltmeter and turned the threaded throttle stop screw and that changes the voltage so I don't understand why people say you can't adjust the TPS. Anyways I tried that to see if I can cure my hanging idle problem, and it didn't work...
  12. G

    TPS setting

    I am trying to get rid of my hanging idle problem and a buddy had a similar problem and dropped his tps voltage to .977 mine was at .990. I tried dropping it to .977 and still i get a hanging idel it takes forever for my car to come to an idle. I was wondering if anyone has a good...
  13. G

    MASS AIR AND FUEL TABLES

    I was wondering if anyone knows where i can get the tranfer tables for a GMS 75mm mass air and 30lb ford racing injectors. Thanks.
  14. G

    Battery light on!!

    My battery light goes on and off whenever it pleases sometimes it blinks really fast. Does this at idle and when driving. I had my battery, alternator, and starter tested. EVerything is perfect. I just don't get why the light is still on.
  15. G

    Anyone selling a morpheous power pipe

    Looking for a morpheous power pipe. Was wondering if it would work with a GMS 75mm mass air.
  16. G

    Questions on Performance parts

    First question is what website can I get a Morpheous Power Pipe from. Second, is it ok to remove the quad shocks. Last, if so how big of a ET street can I put on there. I have 17" rims right now and was wondering if people suggest 15 or 16" rims. So how big a of a tire can I throw on a 16 or...
  17. G

    IDLE with an E-303 cam

    I was wondering where my idle should be with an e-303 cam
  18. G

    Tweecer Question

    If I put the stragey of a A9L computer and burn it to my tweecer can my T4M0 computer be just like the A9L. Plus is the T4M0 CBAZA?
  19. G

    Where to start with the tweecer R/T

    Ok because of everyones input on the tweecer I think I am going to go ahead and purchase one. I know it will be rough to learn at first but i think once i get the hang of it my car should have a good tune. I just have one last question. I dont' have a laptop and don't plan on getting one but...
  20. G

    Has anyone seen hp gain from there tweecer rt

    I am interested in the tweecer rt thoguh i know it will take 2334234324 years to learn how to use it but i am wondering if anyone has seen actual hp gain on the dyno from using the tweecer.
Top Bottom
Back
Forums
Menu