Search results

  1. cobradvm

    What size fuse for DC Controller?

    Hi - I want to use a fuse instead of the fusible link that comes with the DC Controller - anyone know what the fusible link is rated at? I have the FK-35. Thanks
  2. cobradvm

    Hope you don't need any warranty work on your Saleen!

    http://wot.motortrend.com/6476609/tuners/saleen-warranties-dissolve-as-saleen-inc-ceases-operations/index.html Saleen Inc., amidst financial distress, ceases operations and leaves Saleen vehicles and its owners without warranties Breaking News -- March 06, 2009 by Jim Dvorak, Saleen Owners and...
  3. cobradvm

    Where to get a body kit painted in the Seattle/Eastside area?

    Hi - does anyone have a good recommendation for a place to get a cobra body kit painted? I have a kit that just about has all the finish work completed - all it needs is the paint shot on it - its primered and sanded etc. The only part that will need some finish work/primer is the wing. Thanks
  4. cobradvm

    My experience with ABC Exclusive w/pics - DUW!

    I saw another post about ABC Exclusive parts and thought I would add my experience with it as well. I had done some research into getting a cobra rear bumper, cobra wing, and grille insert. After searching through all the posts, I came to the conclusion that ABC was reasonably priced and put out...
  5. cobradvm

    Who owns this red fox body with Cobra R hood - Sweet!

    Does anybody recognize this car? It is exactly what I want mine to turn out like. When I saved the image it was titled "BobsPics" if that helps anyone. I need to find out the paint codes as well as where he got the hood from. Would also like to see any other pics. Thanks!
  6. cobradvm

    How does an A/F sensor hook up to the Tweecer?

    Sorry if this is a dumb question, but I can't seem to find a good answer to this. I am planning on getting a Tweecer RT and am looking at AF sensors. From what I have read, most of the A/F sensors have a 0-5V analog output and this is what is used to input the A/F ratio into the Tweecer to allow...
  7. cobradvm

    Which valve covers clear TF roller rockers keeping the baffle?

    I need to get new valve covers - I am getting oil in my intake - if I pull off the air intake tube there is a little puddle of oil at the bottom of the TB. I am using FRPP cast aluminum finned valve covers, but to get them to fit, I needed to remove the baffle and grind down the bosses. Well now...
  8. cobradvm

    Can someone educate me on ignition systems please!!

    This is one area I haven't really learned much about so if some one can either point me to the right info or can help explain this, its much appreciated! I have a 1990 GT with a 331 stroker, ported heads, custom cam, full exhaust and all the supporting stuff. It has the stock ignition system. So...
  9. cobradvm

    Need help with cobra brake/line lock upgrade - diagrams inside DUW

    Okay – I am getting ready to do my cobra brake upgrades and want to check I have got this right. Plan is to use a 95 Cobra Brake Booster, a 95 Cobra Master Cylinder and install a line lock at the same time. I also have the Maximum Motorsports 3-2 port conversion kit. I also have the 95...
  10. cobradvm

    Do all GT rear bumpers need turned down exhaust tips?

    I am planning on upgrading the entire stock exhaust system (BBK shorties or LTs, and BBK x pipe and magnaflow c/b). However I was looking for an LX type appearance where you can see the exhaust tips. I guess with the GT rear bumper that doesn't work - so if I want that look, I have to go with...
  11. cobradvm

    Need advice on installing a crank shaft repair sleeve

    I replaced my clutch a while back, and did the rear main seal at the same time. The seal of course promptly started leaking, so now I have the repair sleeve to put on the crankshaft. I would prefer to only do this once. So if you have done this before, let me know what you did to get it on...
  12. cobradvm

    What would you do with this clutch?

    What would you do with this clutch? Updated 04/11/04!! See update below... I replaced the stock clutch in my donor (1990GT) about 2000 miles or so ago. I put in Spec stage 1 and also put in a new stainless steel flywheel. Install was straightforward - no problems. This was my first install...
Top Bottom
Back
Forums
Menu