Search results

  1. jnobles06

    4r70w Shift Selector Arm On Trans Question W/pic

    Ok. So, I just installed the new engine in the marauder (4R70W same as the 03 mach 1 auto) and got the tranny all bolted in. When I went to hook up the shifter arm to the cable it wouldn't reach. I came to the conclusion that it got spun around when it was out of the car. Now that it is in the...
  2. jnobles06

    brake light switch

    i converted to a manual transmission in my 95' and cannot figure out how in the hell the brake light switch mounts to the pedal assembly or what parts are needed. i have the little switch that plugs into the wiring harness and when i squeeze it it works but i think there may be something im...
  3. jnobles06

    Vortech T-trim

    since the t-trim is a bigger supercharger than the s-trim does it lag more? for some reason my t-trim isnt making full boost untik about 5k.
  4. jnobles06

    bassani mids vs flowtech longtubes

    i have a blown 00' gt with bassani mids with 3" all the way back but i have an automatic and the headers vibrate since they were not intended for autos (previous owners mistake). i have a chance to trade a friend of mine for flowtech longtubes. which one is better? summit states that they will...
  5. jnobles06

    Sputtering and Stumbling under accel

    i know this is a classic tech but i have a 95 mustang with a 74 351w that is fully built and stroked with h/c/i. i am running a holley 750 with a summit electric fuel pump and a holley reg. @ 7psi w/ full msd ignition. the car was just taken for its first drive and as soon as i give it a little...
  6. jnobles06

    96' Clutch pedal assembly

    will a clutch pedal assembly out if a 96-98 work on a 95?
  7. jnobles06

    crossmember question

    im converting my auto to a t-5. the t-5 is out of a 1993 5.0. i have the right driveshft and the spacer for the driveshaft to make up for the length difference but, will a 1993 crossmember work on a 1995?
  8. jnobles06

    how to run straight up carb?

    i have a 95 v6 that was converted to a 351w carb. the wiring in it is all f@#! up and i want to rip everything out and rewire it carb with no computer how do i accomplish that? what do i need? any info will help. thanks.
  9. jnobles06

    shortblock question.

    how many ft lbs should it take to rotate a shortblock? thanks.
  10. jnobles06

    95' engine/computer harness removal?

    i have a 95 v6 with a carbed 351w. im going efi so im removing the v6 computer harness and computer and replacing them with a 95' gt's computer harness and computer. i pretty much have the harness pulled out but i cant get it all the way out. i think the hole is big enough in the firewall but...
  11. jnobles06

    95 computer and 93 main harness?

    will a 93 main computer harness plug into a 95 computer?
  12. jnobles06

    what motor in 1995 gt? firing order?

    did the 5.0 ho come in the 1995 gt's. im going fuel injected on my 351w but it was in a v6 cae and i got a 1995 gt's computer to run it. are they the same firing order?
  13. jnobles06

    93 and 95 have same injector harness?

    im going fuel injected on my 95 with a 351 and was wondering if a 93 incjector/ engine harness will work with a 95 computer? thanks guys.
  14. jnobles06

    93 and 95 have same injector harness?

    im going fuel injected on my 95 with a 351 and was wondering if a 93 incjector/ engine harness will work with a 95 computer? thanks guys.
  15. jnobles06

    351w Guys, I Need Help!

    i have a 351w in an sn95 and i stroked it to a 393. i bought world products windsor sr heads that were 64cc new, but they have been milled to 61cc's. i have a lunati hydraulic cam (.496 in .520 ex lift, duration at .050 tappet lift is 224 in 234 ex) i have the lunati hydaulic lifters as well...
  16. jnobles06

    351w Guys I Need Help

    i have a 351w in an sn95 and i stroked it to a 393. i bought world products windsor sr heads that were 64cc new, but they have been milled to 61cc's. i have a lunati hydraulic cam (.496 in .520 ex lift, duration at .050 tappet lift is 224 in 234 ex) i have the lunati hydaulic lifters as well...
  17. jnobles06

    non sfi and sfi balancers?

    whats the difference between sfi and non sfi balancers? thanks for any input guys.
  18. jnobles06

    idle problems!!

    the car normally idles at like 1000 rpm's but here lately hit will hit like about 1400 and then drop back down. i will also do it on the highway. ill be driving and it will jump up about 300 rpm's out of know where. thanks or your time guys.
  19. jnobles06

    C-4/3.73's ??

    I have a 450 hp 393 stroker im building and i have a c-4 tranny with 3.73 gears in the rearend. i was wondering if anyone knows what kind of RPM's i will be running at like 70mph? Thanks.
  20. jnobles06

    96' Cobra Heads On a Lightning?

    Im selling a set of 96 cobra heads on ebay and a guy asked me if they would fit a 5.4 lightning and if someone makes a kit to bolt the supercharger to them? Thanks for any input.
Top Bottom
Back
Forums
Menu